While the basics of building a false wall are pretty easy, there is certainly a lot to learn. For instance: What materials do you need? How much space do you need to leave once the false wall is complete? How thick should your false wall be? Read on for answers to these questions and more (you’re in luck—the first is coming up real soon).
Section: False Wall Necessities
- You’re going to need some tools for this project. Having the following items on hand will make your job significantly easier:
- Ball Peen Hammer
- Heavy-Duty Staple Gun
- Pneumatic Stapler
- Drill with Screw Bit
- Drill with Phillips Head Screw Bit
- Felt Tip Pen
- Tape Measure
- You’ll also need a few supplies that are readily available at most home improvement stores:
If you own a TV and want to conceal it, you’ll likely need to build a false wall. Here’s how you can do it yourself in just one day
If you own a TV and want to conceal it, you’ll likely need to build a false wall. Here’s how you can do it yourself in just one day.
- Insulation. The most important part of any false wall is the insulation. Without it, your TV won’t be safe from temperature fluctuations or humidity and condensation caused by changes in indoor temperature—and this can cause damage to your TV that leads to costly repairs. It’s best if this insulation is made from polyurethane foam that is at least 6 inches thick and not less than R-6 (the higher the number on the R-value scale, the better).
- Fabrication materials. You may also need some extra supplies like wood planks or plywood (make sure they’re properly cut), nails/screws/glue gun glue sticks), screws/nails), sandpaper), carpenter pencils) and power tools (drill).
False Wall Necessities
In order to build a false wall, you will need:
- A ball peen hammer
- Heavy-duty staple gun with metal staples (not plastic)
- Pneumatic stapler (not manual) or two 5/8″ drywall screws with phillips head screw bit attached to your drill. You can also use two 5/8″ drywall screws with phillips head screw bit attached to your drill and an air compressor to shoot the screws into place instead of pounding them in manually with a hammer and nail set.
- Tape measure
- Drill (with both a screw driver bit and philips head bit)
Once you’ve gathered these items together, you’re ready to start building
You’re going to need some tools for this project. Having the following items on hand will make your job significantly easier:
You’re going to need some tools for this project. Having the following items on hand will make your job significantly easier:
- Hammer
- Staple Gun
- Drill
- Tape Measure
- Utility Knife
- Saw (hand or electric)
- Pneumatic Stapler
- Wood, Plywood or Drywall Panels
Ball Peen Hammer
If you plan on constructing your own false wall and want to do it right, you’ll need a ball peen hammer. This tool is used for pounding nails into wood with the help of a rounded striking surface (the head) and a flat striking surface (the claw). Ball peens come in different sizes, from small to large. For this project, it’s best if you choose one that weighs about 2 pounds or more and has an average diameter of 1/2 inch thick. These are pretty standard dimensions but there are some variations based on personal preference as well as the type of wood used in construction (for example: hardwood vs softwood).
When buying your tool of choice make sure that it has a good grip – something important when dealing with heavy objects such as these! When working with tools like this one always be sure not only getting all necessary safety equipment but also have plenty space around them so their vibrations aren’t transferred through other things onto yourself or anyone else nearby during use.”
Heavy-Duty Staple Gun
A staple gun is another necessary piece of equipment that you’ll need to complete this project. The staple gun will be used to secure the plywood to the wall studs, so it’s important that you choose one with a high-capacity magazine. This means that when you press down on the trigger, many staples will come out at once instead of just one or two at a time. You’ll also want a heavy-duty stapler because it can handle larger pieces of wood and other materials (like drywall) better than lighter models would be able to do.
When choosing an appropriate staple gun for yourself, keep in mind these key features:
- Staple length – Most models come with several different lengths available; some even offer adjustable settings so they can accommodate whatever type of material they’re working with at any given moment! The longer your staples are, generally speaking (and depending on what kind of project), then more likely they’ll stay secure without falling out over time due to being exposed only partially beneath surface level due – either way though this won’t happen unless something happens which causes them not being held tightly enough anymore such as losing grip while pulling hard against resistance like trying too hard while hammering something too big into place etcetera…
Pneumatic Stapler
The pneumatic stapler is a staple-gun that uses compressed air to fire staples, nails and other fasteners. It’s useful for securing drywall panels and other materials, but it can also be used to attach materials together quickly without the need of adhesive.
The most common type of pneumatic stapler is made up of three main parts: a feed mechanism, an air chamber, and a driver. The feed mechanism takes long sheets of material (like drywall) and feeds them through the air chamber toward the driver so they can be fastened together. The driver contains an internal piston that compresses a spring when pressure from compressed air pushes against it; this causes the piston to drive outwards and fire off any fasteners in its path.
Drill with Screw Bit
- Drill with Screw Bit
- Measure Distance between Studs
- Staple Wire on Back of False Wall
- Screw in Place
Drill with Phillips Head Screw Bit
- Drill bit size depends on the thickness of the plywood you are using.
- Drill bit size depends on the thickness of the drywall you are using.
- Drill bit size depends on the thickness of the lumber you are using.
Felt Tip Pen
- Mark the wall with a felt tip pen.
- Use a felt tip pen that can be easily removed with rubbing alcohol, such as a Sharpie or Staedtler pigment marker; otherwise, you’ll have to paint over it again when it fades away in the future.
- The marker should not damage your wall either (i.e., don’t use an oil-based paint marker or permanent marker).
- Make sure your pen will not fade over time by testing it on scrap paper first before applying it to your wall.
Tape Measure
To start, you’ll need to measure the wall you want to build the false wall in. Measure the height and width of the wall, as well as the distance between each stud (the wooden pieces that hold up a house). Also measure how far apart those studs are from each other and from your ceiling.
2×4 Lumber (3 96″ lengths)
2×4 lumber is a standard size, so you’ll be able to find it at any hardware store. You’ll need three pieces of 2×4 lumber that are 96″ long (or about 8 feet). Each piece should be cut to the height of your wall before you begin building your false wall.
Utility Knife
A utility knife will be your best friend while working with drywall. It’s great for cutting and scoring the sheet material, and it can also be used to remove the excess bits of paper that are left over after you have cut out a hole in the sheet. If you don’t have a utility knife, go ahead and grab one (or borrow one from a friend). They’re relatively cheap.
5/8″ Plywood or Drywall (1 4’x8′ piece)
Not sure whether you should go with a piece of plywood or drywall?
If you have access to drywall, it’s generally best to use it for a false wall because it’s stronger and more durable than plywood. You’ll also need less materials in total.
However, if you don’t have access to drywall and are looking for something cheaper, then plywood might be better suited for your project (but make sure you cut down your frame accordingly).
The reason why I think many people prefer drywall over plywood is that they don’t want extra holes in their walls after everything is done. Plus, when using wood screws on drywall with anchors like toggle bolts instead of through-bolts (which require pre-drilling), there won’t be any fasteners left sticking out past the surface level which looks cleaner but requires more work upfront since each hole has its own anchor installed before screwing anything into place
3/4″ Plywood or Drywall (1 4’x8′ piece)
You’ll also need to get a piece of 3/4″ plywood or drywall that’s at least 1′ taller and 4′ longer than your TV. The reason we use this material is because it’s the same thickness as 1×4, 1×6, 1×8 and even 1×10 lumber (which you can use if you have a big enough wall).
3/4″ Plywood: If you’re building a wall from scratch, you can use standard 3/4″ plywood for strength and durability. This will create up to an 8′ tall false wall for hiding your TV behind.
Drywall: Using drywall is generally easier when it comes to installing on an existing wall because it doesn’t require much work beyond mounting it into place with nails or screws (which are included). This option allows you to create a 9′ tall false wall that goes all the way across your living room without requiring any support beams along its length.
Building a false wall is not nearly as difficult as it sounds when you know what you’re doing.
Building a false wall is not nearly as difficult as it sounds when you know what you’re doing. It’s just one of those things that takes time, but it’s also one of the most rewarding projects you can do in your home.
Here are the materials and tools that you’ll need to build a false wall:
Tools: tape measure, utility knife, wood saw (useful but not necessary), hammer, drill with bits (or screwdriver), level and pencil. Lumber: Plywood sheets for backing if needed / drywall or metal studs / insulation board / drywall screws or nails (or other fasteners). Materials for finishing: felt tip pens/paintbrush(es)
Conclusion
When it comes to hiding a TV, there’s nothing better than building a false wall! Not only will you be able to conceal your television, but you can also build shelves or storage behind it for all of your other electronics. Using our guide, you should have the wall built in no time at all. Just remember: measure twice and cut once (although it’s okay if you mess up once…)
