For Hardie Trim. These nails are specially designed for use with Hardie trim and are guaranteed to be free of defect .All-Purpose Nails are designed to work with Hardie trim and come in sizes that correspond to Hardie thinner nails. They are pre-drilled and do not require additional pilot holes. The best nails for hardie trim are fasteners made of materials that have been approved by the Hardie Plank product manufacturer. These nails have a small head and flat surface, owing to their different design. The nails for Hardie trim are made from galvanized high-carbon steel, to last longer and resist rusting. EZ Squeeze Fingernail Nails are specifically designed to be used with Hardie Board. These two-inch long, 10-gauge nails are easy to use and require no pre-drilling. Made of high-quality steel, their sharp points mean that they can hold up under intense pressure. They can also be used with cement board trim as well, unlike other cheap nails that make boards pop off.
I’m a home improvement professional who has installed a lot of HardieTrim and other fiber cement trim. Fiber cement is used for decorative and protective trims around doors, windows and eaves. It holds up well to the elements, but you have to use the right nails to make sure your installation holds up as well. Using the proper nail will keep your trim in place and prevent it from cracking or splitting when exposed outdoors to humidity, rain and wind.
Hardie trim is made from fiber cement and is used for decorative and protective trims around doors, windows and eaves.
Hardie trim is made from fiber cement, which is a composite material that’s typically used for exterior trims around doors and windows. The material is actually more durable than wood, and it can withstand moisture better than traditional lumber.
Hardie trim also comes in a variety of colors and finishes, making it easy to match existing decorating themes or paint schemes in your home.
Most importantly, hardie trims are resistant to rotting or cracking over time as well as warping due to extreme temperatures (like those found on the inside of your house). This means they are likely to last 25 years or more!
Fiber cement material holds up well to the elements, but you have to use the right nails to make sure your installation holds up as well.
Fiber cement material is a popular choice for exterior trim because it is durable and resistant to rot, decay, mold and mildew. It’s also strong enough to stand up against the elements. If you’re using hardie trim for decorative or protective trims around doors, windows and eaves, you’ll need nails that can hold up as well.
The best nail for hardie trim is one made from galvanized steel coated with zinc under the surface of the metal so that it won’t rust as quickly as regular steel nails would in your climate conditions (coating helps prevent rusting). The coating also protects your hands from pinching when working with them.
Using the proper nail will keep your trim in place and prevent it from cracking or splitting.
When installing Hardie Trim, the right nails will help you get the job done quickly and easily. Follow these tips to maximize your experience:
- Ring-shank or spiral-shank nails are the best for most applications. These types of nails have a special gripping mechanism that holds the trim in place as it’s being installed.
- Use a nail gun with ring-shank or spiral-shank nails (some guns can only use one type). This will allow you to drive the nail at an angle so that it goes into the trim with ease and does not push out from under pressure. It also prevents splitting or cracking of your trim material due to inconsistent pressure around its circumference.
- Use a hammer and nail set if necessary but only when driving small sections of trim into place where access is limited by door jams or other obstructions in close proximity to each other (i.e., corners). Be sure not to exceed maximum recommended lengths allowed by each specific brand’s instructions on how far apart they should be placed; otherwise, this could cause damage such as splitting/cracking along its length
Use ring-shank or spiral-shank nails.
If you’re building with exterior fiber cement siding, use ring-shank or spiral-shank nails to ensure a strong hold. For interior applications, use spiral-shank nails.
You can drive these nails into your trim using a hammer (the same tool you used for the hardie board).
Conclusion
So next time you go to do your nails, remember this article. It will help you avoid making a common mistake.
