Best Nails For Pressure Treated Wood

The best nails for pressure treated wood will be galvanized to prevent rusting. They should have a corrosion resistant coating, which protects the metal as well as the surrounding area from weather. They also need to be long enough to penetrate through the sawdust that surrounds the lumber’s core. These qualities will ensure that there is no chance of deterioration from moisture or leaking when it rains and snow melts. If you are planning a new deck, fence or other wooden structure and want to prevent rot, don’t use nails that aren’t designed for pressure treated wood. Pressure treated lumber does not need nails that are made of stainless steel or aluminum because these might rust. Use only galvanized finish nails. They provide excellent protection from the rot-causing bacteria that thrive in wet soil. Use a nail gun with at least a 16-gauge nail if you’re worried about accuracy, but don’t nail more than two inches apart at any point along the boards.

When it comes to building or remodeling a deck, you want to ensure that your nails are strong enough to hold the weight of the wood. This can be especially important for those using pressure-treated lumber, as it is heavier than traditional wood. Pressure treated wood requires special nails in order to hold the pieces together and prevent corrosion from sinking in deep beneath its surface.

Nails for Pressure-Treated Wood

In this article, we will look at nails for pressure treated wood.

Pressure treated lumber is an innovative way to prevent rot in your deck or fence posts. It involves injecting chemicals into the wood that kill bacteria and fungi that cause decay. However, this process can leave the treated timber vulnerable to rust if it’s not sealed or coated appropriately. You need to choose the right fastener when building with pressure treated lumber because they are more susceptible to rusting than regular nails or screws.

The two most common types of nail used on a project with pressure-treated lumber are hot-dipped galvanized (HDG) nails and stainless steel spikes or screws. HDG nails are typically cheaper than stainless steel spikes but don’t last as long before they rust out over time due mostly due differences in manufacturing processes between them both being galvanized steel products but also other factors such as how well each type was made through quality control measures taken during production which affects their overall lifespan once installed into your project where it may sit exposed indefinitely outdoors under harsh conditions like rainforest climates where heat/humidity fluctuations occur often throughout daylight hours year round without any relief period; whereas stainless steel would stay looking nice much longer since its composition allows it resist corrosion better than regular galvanized material does over time because there aren’t any impurities present within them like there would be if using non-stainless alternatives such as aluminum alloys instead (which aren’t recommended unless necessary).

What are the options

There are a number of different nails that can be used with pressure treated wood. They all have their own benefits and drawbacks, so it is important to select the right one for your project.

  • Stainless steel nails: The most popular choice is stainless steel, as they are easier to drive into the wood than other types of nails. They also hold up well over time, which makes them great for projects that require a lot of pressure on the wood (such as decks or outdoor furniture).
  • Aluminum: Aluminum nails are lightweight and easy to use with high-powered compressors or pneumatic nail guns. They come in two finishes—bright silver or dark bronze—and have a slight sheen when viewed from above (though not enough for anyone but an expert eye). This gives them an elegant look that works well with many types of natural woods such as cedar shingles or pine boards; however, since aluminum does not rust like other metals do there may be some concern about its durability over time due to oxidation caused by weather conditions like humidity levels around here.

Hot-Dipped Galvanized

Hot-Dipped Galvanized Nails

These nails are made of steel, and they’re coated with zinc to prevent corrosion. They’re used to fix lumber and plywood, and they’re the most common nail used in construction. They are also the best option for pressure treated wood because of the protection from rust that comes from their galvanization process.

Stainless Steel Nails

Stainless steel nails are the best option for pressure treated wood. These nails will not rust, making them the most durable option on this list. They can be painted to further extend their life, but they will eventually succumb to corrosion and begin to rust.

These nails are more expensive than other options and can be difficult to drive into your decking material due to their thickness (1/4 inch). But once in place, they’re almost impossible to remove by hand—making them a good choice if you’re worried about theft or vandalism.

Stainless Steel Nails last anywhere from 3-5 years depending on where you live and how often you use your decking area or patio furniture set up around it! These are also great if you have kids who love climbing trees so much that sometimes branches fall off onto your freshly laid slate patio; these stainless steel ones won’t break like regular iron ones would.

Aluminum and Silicon Bronze

For those who are looking for the best nail to use with pressure treated wood, aluminum and silicon bronze nails are an excellent choice. These nails are not as strong as hot-dipped galvanized nails or stainless steel nails, but they are stronger than galvanized nails. They also have the added benefit of being available in a variety of lengths, head styles and color options—including black oxide coating!

This type of nail is most suitable for applications where aesthetics matter more than strength (such as framing walls).


The best nails for pressure treated wood are hot-dipped galvanized. They’re the most effective at preventing corrosion of the wood, and they have high tensile strength. Stainless steel and aluminum nails can also be used; however, these types of nails will not prevent corrosion as well as zinc-coated ones. Silicon bronze is another option that may be worth considering because it has good properties similar to those found in hot dipped galvanized nails but is less expensive.

For more information on this topic, see our article on The Best Nails For Pressure Treated Wood: Hot Dip Galvanized Vs Stainless Steel Vs Aluminum And Silicon Bronze Nails

These nails are the best option to use with pressure treated wood

If you’re looking for a nail that will last the test of time, these are the ones to choose.

They are designed specifically for use with pressure treated wood and can withstand heavy loads and abuse. They also have a wide head for easy installation and removal, which is important if you’ll be attaching multiple boards together at once or removing your project from the lawnmower path it fell in on accident.These nails are ideal when you need a strong hold but don’t want to sacrifice style: they come in clear or galvanized finishes, so they’ll blend seamlessly into any outdoor space—from gardens to patios.


It is important to use the right nails when working with pressure-treated wood. The chemicals used to treat the wood can leach into and corrode standard nails, which will cause them to rust and eventually fail. Hot-dipped galvanized nails, stainless steel nails, or silicon bronze or aluminum nails are all good choices for this purpose.

Leave a Comment