Building A Stacked Stone Wall

Building a stacked stone wall is not as difficult as it may seem. The first step is to choose the location for your wall and then decide how high you want it to be. The height of the wall can vary depending on what type of look you are trying to achieve, but usually, a height of about two feet is a good choice.

Next, you need to dig out the area where you will be laying your stones. This should be done by hand with a pick or shovel. It is important that this area is level and straight so that your wall will look uniform when finished. If necessary, use stakes and string lines to mark out where you want the base stone row to go before removing any dirt from inside this area.

Once all of this work has been done, you can begin laying down your stones in rows similar to those found in brickwork projects like sidewalks or patios around homes today; however, instead of using mortar between each one like those other types do, just lay them down on top of one another over top of dirt or sand until they reach the top edge or whatever height you decided upon earlier.

The term “stacked stone wall” refers to any wall that is built with natural stones that have been stacked on top of each other in an alternating pattern. This type of wall is also referred to as an “architectural wall”, as it looks very similar to those found in castles or other historical buildings.

A stacked stone wall is a classic addition to any backyard or garden. It can be used in a variety of ways, such as as a barrier between your property and the neighbor’s yard. You can also use it as an accent piece that highlights your landscaping features, such as flowers or trees. Stacked stone walls are not only functional but also attractive, so if you’re looking to add some character to your home, consider building one yourself.

What is Stacked Stone Wall

A stacked stone wall is a natural-looking, beautiful addition to your home. It’s also one of the most affordable ways to add style and value to any outdoor space.

Stacked stone walls are constructed using solid pieces of rock, stacked one on top of another in a straight line or curved pattern. They can be built as permanent structures using mortared blocks, or they can be used as a temporary fence made from railroad ties (or something else) that will eventually be removed when it’s no longer needed.

The biggest difference between stacked stone walls and rock walls is that twisted rock formations are not used for stacked stone walls; only flat stones are used for this type of construction project.

Steps to install Stacked Stone Wall

  • Plan the project.
  • Dig a trench.
  • Build the base.
  • Install tiered rows. Finish with flat stones, or leave out this step if you want to build the wall straight up without any tiers, which can be done with smaller pieces of stone instead of large rocks if you prefer to create more of a terrace effect.

You may also decide not to install any mortar at all; in this case, just lay all your stones directly on top of each other and make sure they’re level before starting on another row higher up on your wall’s foundation so everything stays sturdy as it goes along.

Choose the type of stone

Choosing the type of stone for your stacked stone wall can be a daunting task. There are many factors that should be considered when choosing the perfect stone for your project.

  • Choose a stone that is durable and will last for years to come.
  • Choose a stone that is easy to clean, especially if you’re planning on using it outdoors or around children and pets.
  • Choose a stone that is easy to find, so that you don’t have any difficulty in getting it from the supply yard where you buy your materials from or from an online supplier like Amazon or Home Depot .

Purchase your supplies and equipment

To build a stacked stone wall, you’ll need to purchase the following supplies and equipment:

  • Stone. Use only natural stones that have been quarried from the ground in order to keep the most authentic look possible. Your local stone supplier should have an extensive selection of loose stones for sale or rental.
  • Mortar. The mortar you choose for your stacked stone project will depend on how much work you want to put into it. If you’re willing to spend some time mixing and applying it manually, use natural cement made from portland cement and sand (or other materials). For those who want something easier to apply, there are premixed masonry cements available at most home improvement stores which contain aggregate materials like sand in addition to Portland Cement as well as other additives such as water reducers that help reduce drying time between applications of mortar on each course laid during construction

Plan your project

Planning is the key to a successful project. It’s important to think about what you’d like to achieve with your stacked stone wall and how much time, money and effort it will take. To begin with, make a list of tasks that are necessary for this type of wall construction; these include:

  • Laying out the shape of your stacked stone wall
  • Building braces to hold up your structure (if needed)
  • Choosing a mortar mix that can withstand weathering over time

Dig a trench

The first step is to dig a trench. You can use a shovel for this or you can rent or borrow one from your local hardware store. The trench should be about 6 inches deep and about 3 feet wide, but that’s not really important—the important thing is that it’s long enough and deep enough to hold all the stones you’ll need for your wall. When digging, try to make sure your line is straight and level as much as possible; it will make laying the stones later easier on everyone involved.

Build the base

You’ll want to dig a trench that’s about 12 inches deep and the length of your wall. This will serve as the base for your stacked stone wall. You can build a base out of concrete or stones, or you can use rebar if you’re worried about erosion or want something more durable. Next, add gravel up to six inches from where your stones will eventually be placed (this will keep water from seeping through), then install some rebar on top of that gravel layer. Make sure it’s level with the ground before placing any stones. Now start stacking those rocks.

Install tiered rows

Tiered rows are built by stacking stones in a staggered pattern. The stones should be stacked so that the gaps between them are not too wide or too close together, but instead fill up space without leaving large gaps. You should also ensure that the top and bottom of each stone is level with the stones above and below it, so that you can attach them to each other without creating any large gaps between them.

Once you have built tiered rows, you can use them as an anchor point for your second row of stacked stone pieces.

Finish with flat stones

Once you’ve got the base of your stacked stone wall in place, it’s time to finish with flat stones. Make sure everything is level and straight before moving on to this step.

  • Place a flat stone at each end of the wall, then use a hammer and chisel to cut out an area from each side of these stones so that they can sit flush with the rest of your stacked stone wall.
  • After cutting out those areas for your two end pieces, fill in any gaps between other stacked stones with small rocks or gravel (this will help prevent weeds).

Reasons for Building A Stacked Stone Wall

There are many reasons you may want to build a stacked stone wall. These include:

  • To add visual interest to your yard. If you’re looking to give your outdoor space some flair, or if you’ve recently purchased a home with an unattractive fence, then building a stacked stone wall is definitely something worth considering.
  • To create a privacy screen. A stacked stone wall can be used as an effective tool for blocking out noise and prying eyes from neighbors or passersby walking along the sidewalk next door.
  • To block out noise (because nothing says “I’m serious about my peace and quiet” like laying down some massive boulders in front of my house).

Uses of Building A Stacked Stone Wall

Stacked stone walls are used for many reasons, including:

  • To define property boundaries
  • As a retaining wall
  • For privacy
  • As a security measure (for example, to keep out unwanted visitors or animals)
  • As an attractive backdrop for your fire pit

Cost of Building A Stacked Stone Wall

It’s important to know how much you can expect the project to cost, so you can make an informed decision. The average cost of a stacked stone wall is $2 per square foot, with some variations depending on the type and amount of stone used. This means that if your wall is 10 feet long by 8 feet high it will cost about $800 to build.

Materials for Building A Stacked Stone Wall


There are many different types of stone, but you can use any type for your stacked stone wall. You’ll need stones that are about the same size and shape as each other; this will make it easier to build the wall. Using a few different colored or shaped stones will give your stacked stone wall a more interesting look, so consider what types of stone you want to use before starting your project. If you’re using limestone, there may be some cracks in it; these can be filled with mortar so they don’t show on your finished stacked stone wall.

For mortar:* Sand* Cement (about two parts sand to one part cement)* Water

Benefits of Building A Stacked Stone Wall

The benefits of building a stacked stone wall are many. It’s a low-maintenance option, and it’s also a great way to add privacy to your yard or create a focal point in your landscape. If you want to use the stacked stone wall as a barrier between your property and another person’s, that’s an option as well one that is becoming more popular as we speak.

If you’re looking to add visual interest to your yard, a stacked stone wall could be the perfect feature.

If you’re looking to add visual interest to your yard, a stacked stone wall could be the perfect feature. Stone walls are a great way to bring natural beauty and unique character into your landscape. They can also serve many practical purposes:

  • Stacked stone walls can vary in size and shape, so you can build one that matches the property’s topography or fits your design preferences.
  • Stacked stone walls can be built up to any height (typically 8 feet) without requiring any additional support structures like concrete footings or foundations.
  • Stacked stone walls come with various widths from 2 inches all the way up to 6 inches. This makes them an ideal choice for homeowners who want their home improvement project to blend seamlessly into its surroundings while still standing out as a striking focal point.

In Conclusion

Building a stacked stone wall can be a great way to add charm and character to your home. You can use them as an accent in your landscaping or create an entire room out of stones. They are very versatile, so there are many different ways that you can use them.

Leave a Comment