Building Dry Stack Stone Retaining Wall

Retaining walls are a great way to add a dramatic element to your landscape, and dry stack stone is the perfect material for this job. It’s easy to install, durable and requires little maintenance. This type of wall can be built straight up or leaned at an angle. You can also use it to frame pathways or as part of a border around flower beds.

What You’ll Need

Dry stack stone retaining walls are made from irregularly shaped rocks stacked on top of each other without mortar. The stones should be stacked with their tops at an angle no steeper than 45 degrees. If you’re building a straight-up wall, place the first row of stones at one end of the trench that will become your wall, with each row offset by about six inches from the one beneath it. Start with small stones on the bottom layer so they’re easier to place and move around while building your wall. Continue adding rows until you reach the desired height (usually between 6 inches and 2 feet). Make sure each row is level before adding another layer so everything stays straight and stable once installed.

Dry stack stone retaining walls are beautiful and functional. They can be used to make stairs and walkways, as well as to create a natural-looking border around your home.

A dry stack stone retaining wall is made from flat stones that are stacked on top of each other without mortar. It’s a simple process but it does require some patience and planning. If you want to build your own dry stack stone retaining wall, follow these steps:

1. Measure the length of your retaining wall, then multiply by three to get the total amount of stone you’ll need. Use this number to calculate how many bricks you’ll need for each course (the layers that are stacked on top of one another) of your wall.

2. Choose which side of the yard will face outward and dig down into the soil about six inches deep (or as deep as necessary) along that side until it meets with bedrock or concrete this will help prevent erosion over time due to rain runoff from above ground level so keep this in mind when laying out plans for future landscaping projects.

3. Lay out your first course (row) of bricks across one end of where they will eventually sit atop one another; then place one brick on top

A stone retaining wall adds value to your home or business site and makes for an attractive addition to your landscape. Stone is a natural material that can be used in many ways, including landscaping and building stone retaining walls.

What is Dry Stack Stone Retaining Wall

Dry stack stone retaining walls are a type of wall that is made up of stones stacked on top of each other, rather than stacked in mortar. The stones are held together by gravity and their own weight. Because there is no need for mortar, dry stack stone retaining walls require less work compared to mortared ones. They are also relatively easy to build and can be used as privacy walls or along driveways or property lines.

Dry stack stone retaining walls can be made from fieldstone or split stone (also known as dimensional stone). Fieldstone is usually found in an area’s surrounding environment while split stone has been cut into specific shapes and sizes before being laid out on the ground as a dry stack wall construction material.

Uses of Dry Stack Stone Retaining Wall

Stone retaining walls are used to protect the sides of slopes, hillsides, and roads from erosion. They can also be used as a decorative feature in landscaping.

Stone retaining walls can keep water out of a basement or crawl space. When building one, make sure to leave it 6 inches higher than your finished floor level so that you’ll have room for drainage.

How long will Building Dry Stack Stone Retaining Wall last

Dry stack stone retaining walls are a long-term solution for your landscaping needs. They can last for decades, even centuries. They are low maintenance and do not need to be replaced. They can be built to any height or shape you like.

Steps involved in Building Dry Stack Stone Retaining Wall

  • Dig it up
  • Level it out
  • Start setting stones
  • Backfill and compact your wall
  • Top it off

Step 1: Plan It Right.

The first step to building a dry stack stone retaining wall is to plan it right. This means getting your measurements correct, using a level to check the slope of your site, making sure you have enough space for the wall, checking for underground utilities, and making sure that your wall is not too close to your house or other structures. It also means making sure that you have enough material.

Once you have done all of this planning and measuring, it’s time to start building.

Step 2: Dig it Up.

Digging a trench is the first step in building a dry stack stone retaining wall. It’s essential to build a dry stack stone retaining wall, and how deep you dig your trench depends on the height of your wall.

A popular way to achieve this height without digging down too far is by using pavers that are 1″ thick. A finished wall made with 1″ pavers will stand at around 42-43″, so if you dig down enough to accommodate them (about 8″), then there’s no need to worry about adding extra height later on by filling up the voids between each layer of stones with soil or concrete rubble.

Step 3: Level It Out.

If the soil isn’t level, you can use your wheelbarrow to help even things out. But if you want to be extra sure that everything is perfectly level, invest in an electronic laser level. They’re available at any home improvement store and are super easy to use: just point the laser at the ground where you want to mark a line and press “go.” The laser will shoot out a straight beam from one end of its range all the way through its other side so long as there’s nothing blocking it and leave a thin red line on whatever surface it hits first. This will give both you and your family peace of mind knowing that your wall is going to be straight without any sloping or bulging problems later down the road.

Step 4: Start Setting Stones.

Now you’re ready to start setting stones.

Your first step is to check the level of your wall. Use a spirit level or laser level, or simply lay out a string line across the top of your wall and adjust it until it’s perfectly straight.

The next step is to spread mortar onto all sides of each stone with a trowel. This will help keep them from sliding down as you set them into place, but also serves another purpose: when you tap those stones into place with your rubber mallet (or sled), they will be firmly held in place by their own weight, rather than just sitting loosely atop one another like dominoes on an unstable table which means less chance for any pieces to fall out altogether.

Step 5: Backfill and Compact Your Wall.

  • Backfill your wall with a mixture of sand and gravel.
  • Compact the backfill by using a tamper, shovel, or foot while wearing steel-toe boots.

Step 6: Top It Off.

  • Top it off.

Make sure the wall is straight by using a level on each side of the wall. If it’s not straight, you’ll need to make adjustments before you continue laying stone or better yet, think about moving your project location so that it’s easier to build a straight wall.

When you’re satisfied with the height and level of your wall, use a shovel to push all dirt back into the hole so that there are no gaps between stones and none sticking up from above ground level. Next comes smoothing out any bumps or irregularities in the ground surface created by digging for drainage ditches and trenches for electrical lines or other utilities (if necessary). This is where having good soil will really pay off; if yours isn’t as fine-textured as we’d like ours were here at Crazy Stone Retaining Walls HQ (and trust us when we say “not fine-textured”), consider mixing compost into those areas where they’re feeling less than perfect before putting down seeds or sod after building your wall.

Materials needed for Building Dry Stack Stone Retaining Wall

Materials needed for Building Dry Stack Stone Retaining Wall:

  • Stone
  • Concrete (for the footings)
  • Concrete forms
  • Mortar or mortar mix (for the stone)
  • Masonry tools such as a trowel, level and string line.

Tools needed for Building Dry Stack Stone Retaining Wall

  • Hammer
  • Chisel (preferably a masons chisel)
  • Trowel
  • Pick or hammer claw pick
  • Shovel (for moving dirt around)
  • Wheelbarrow with wheelbarrow wheel to move material easily
  • Level – a level is needed to make sure that the wall stays straight and plumb (level). You can use a laser level if you have one, or an old fashioned bubble level. A plumb bob will also work here as long as it’s not too heavy for your hand to hold up for some time. If you don’t have any tools at all, tie a string from corner to corner and follow it with your eye as you build each course of stone until they meet in the middle of the wall. That way you will know if they are straight enough when they meet one another on top of each other later down in this step by checking how much space exists between them vertically along their length instead just horizontally across their width like when using just plain string line alone would tell us only how far apart two stones might be laid side by side without ever checking whether those same two stones were actually parallel yet since we wouldn’t have any idea which direction each was facing at first glance which means there needs extra work done later down here today before we’re finished working here tonight.”

Benefits of Building Dry Stack Stone Retaining Wall

Dry Stack Stone Retaining Wall is a beautiful, functional and cost effective solution for retaining walls. It provides a unique opportunity to create something that is very personal and special to you.

Benefits of Building Dry Stack Stone Retaining Wall:

  • beautiful & adds value to your home or business property
  • easy to install and maintain
  • reduces the need for maintenance costs like irrigation or mowing by up to 50% (depending on what you are using it for)

Costs of Building Dry Stack Stone Retaining Wall

Building a dry stack stone retaining wall can vary in cost, depending on the size of your project and the materials you use. If you decide to build your stone retaining wall with concrete blocks purchased at home improvement stores, it’s likely that you’ll end up spending more money than if you use natural stones such as granite or limestone.

If you’re building a large outdoor patio space with a dry stack stone retaining wall, for example, then this will be one area where it makes sense to spend some extra dollars (or loonies). The larger your patio is going to be and the more elaborate it gets with decorations such as furniture and plants the more important it’ll be for it to have an attractive border between your house and yard.

Maintenance tips for Building Dry Stack Stone Retaining Wall

  • Clean the wall regularly.
  • Don’t let plants grow up the wall.
  • Don’t let water pool on top of the wall.
  • Don’t let people walk on the wall.
  • Don’t let children play on the wall.
  • Don’t let animals dig in the wall

Having a nice stone retaining wall can add value to your home or business site, and make an attractive addition to your landscape.

You can build a stone retaining wall to add value to your home or business site, and make an attractive addition to your landscape. Stone retains soil against the side of hills so that it doesn’t wash away in heavy rains. It also acts as a water catchment basin for rainwater which will help you keep your yard looking green year round.

Stone walls are used around flowerbeds, patios, and driveways to create a natural barrier from erosion caused by rainwater runoff. They can also be used as garden walls or walkway borders to help define areas such as gardens or pathways through the yard or along property lines.

In Conclusion

Dry stack stone retaining walls are an excellent choice for homeowners and business owners who want to add value to their property, without spending a lot of money. They are also very durable, which means you will not have to worry about maintenance costs in the future. If you are ready to begin building your own dry stack stone wall then take a look at our guide below.

Leave a Comment

error: Content is protected !!