Commercial Building Wall Types

The commercial building wall is a great way to add some style and sophistication to your home.

The commercial building wall comes in different colors, so you can choose the one that matches your style.

The commercial building wall is suitable for any room in the home, from the kitchen to the bathroom.

When it comes to creating a commercial building wall, you’ve got a lot of options. The first thing you should do is decide what your goals are for the wall. Do you want to showcase artwork or just have an interesting background? Or maybe it’s all about the functionality of the room. Whatever your goal, there are many different types of materials, finishes, and textures that can help you achieve it.

A brick or stone veneer is an easy way to add some texture and visual interest to a commercial building wall. It can be used on its own or combined with other materials like wood or metal. If you’re looking for something more modern, consider using glass bricks instead they offer architectural flair without sacrificing functionality.

Another option is using painted drywall as your commercial building wall this creates an interesting look without any maintenance required since it won’t need repainting as often as other materials might (like brick). It also allows for more flexibility in terms of colors/patterns because there aren’t any grout lines between individual pieces like there would be in brick or stone veneer installations.

Have you ever wondered what types of walls are used in commercial buildings? This article will break down the different types of walls that are used in commercial buildings and why they’re used. The information gathered from this article can be applied to any type of building.

What is Commercial Building Walls?

Walls are the most important part of any building. They’re the skeleton, holding up everything else and allowing for a structure that can be built upon, with windows cut out for natural light to shine through and doors providing access to each room.

Walls also do more than simply divide space; they provide structure. In fact, if you have a new-build house or office building in mind but don’t yet know what kind of walls will be going up inside those spaces, we recommend that you hold off on finalizing most details until after your contractor has installed the wall system (or systems). That way, when it comes time to choose things like flooring materials or paint colors in your interior design plans later down the road or even decide where the furniture will go you’ll already have an idea of where these elements need to fit into place without having had them dictated by the layout of other parts within your home or workspace

What walls are used in commercial buildings?

Commercial building walls can be found in many different types of businesses. From grocery stores to banks and fast food restaurants, there are different materials being used for the construction of these buildings. Some businesses may even use a combination of several different types of wall material.

The most common material used as a commercial building wall is concrete block because it is durable and cost-effective and easy to install without having to hire an expert contractor or architect. The average price per square foot ranges from $10-$35 depending on how much work goes into installing it, where you live and how many floors your business has (the more floors there are usually means more walls). If you don’t want concrete blocks but would rather use bricks then this will cost you around $11-$13 per square foot which includes labor costs with installation but does not include any tools needed for installation such as drills or mortar mixers if necessary.

Types of Commercial Building Wall

  • CMU: Concrete masonry unit walls are the most common type of commercial wall construction, and today, they’re made from blocks of concrete or brick. In general, CMU block has a compressive strength of 3,500 psi at 28 days.
  • AAC: Autoclaved aerated concrete is a lightweight material that can be used to build walls up to three stories tall (but often only one story). Its R-value is about 8 per inch; which means it’s more energy efficient than other building materials with lower R-values.
  • ICF: Insulated concrete forms (ICFs) use hollow foam insulation sandwiched between two layers of concrete for thermal mass properties that help keep buildings cooler in summer and warmer in winter. You can buy precast panels for this type of wall system or build your own from scratch using modular blocks or styrofoam insulation forms like those used when pouring basement footings or foundation slabs underneath homes built on sloped ground without basements instead.
  • SIPs: Structural insulated panels (SIPs) are made using several sheets of wood sheathing glued together into an insulated sandwich panel with rigid foam insulation between each layer as well as outside surfaces like siding attached later over its surface once complete – usually by gluing them together first before nailing them onto exterior walls where desired locations exist beforehand

Concrete Masonry Unit (CMU)

Concrete Masonry Unit (CMU) is a type of concrete masonry unit (CMU) that is used in the construction of walls in commercial buildings. It is made of concrete and has a hollow space inside. CMUs are manufactured to fit together like bricks, but they’re actually made up of individual cubes that interlock with each other. The hollow spaces provide strength and flexibility as well as allow for insulation to be installed between the panels during construction.

Autoclaved Aerated Concrete (AAC)

Autoclaved aerated concrete (AAC) is a lightweight, high-performance material that is used in the construction of commercial buildings. AAC is made from a mixture of cement, sand, and other materials that are mixed with water and then aerated through an autoclave process. During this process, steam is introduced into large pressure vessels to produce bubbles within the mix as it hardens.

  • The resulting material has many desirable characteristics for use in construction applications including strength and durability as well as being non-combustible and energy efficient.
  • AAC can be used for walls, floors, or roofing in commercial buildings because it is lightweight yet strong enough for structural components such as beams or columns.

Insulated Concrete Forms (ICF)

Insulated Concrete Forms (ICF) are a popular choice for many commercial building projects. They are hollow concrete blocks that have insulation on the inside and outside, making them strong, durable, and fire-resistant. ICF can be used for exterior walls, floors, and roofs. This type of wall construction is ideal for commercial buildings that need to be able to withstand harsh weather conditions or extreme temperatures.

Structural Insulated Panel (SIP)

Structural insulated panels (SIPs) are made of two or more layers of rigid foam insulation separated by a layer of oriented strand board (OSB). They are used as exterior sheathing, interior walls, and roofing.

SIPs come in different sizes. The width and thickness vary depending on the wall’s function. Panels for wall applications can be purchased in 4′, 6′, or 8′ widths; 8′-0″ is considered standard in most areas. Panels that are used for roof applications are usually 12″-16″ wide; they’re also available with thicker widths if needed. If you need to insulate an existing structure that was built before the use of manufactured SIP panels was common, it may be possible to retrofit your home with this type of insulation material instead of adding another layer over top of your current walls/ceilings just make sure you check with a contractor first.

Timber Frame

Timber frame walls are made of timber and plywood, which are assembled using nails, screws, or bolts. Timber frame walls are usually used in wood-framed buildings but can also be used in low-rise construction.

Timber frames are typically made out of two layers of 3/4 inch OSB board with a layer of hardboard facing on each side (1/2 ” total thickness). The OSB is then fastened to studs with 1-5/8″ drywall screws at 6 inches on the center for shear purposes only; the plywood does not need any additional fasteners as it has adequate strength from its laminated construction.

What is the classification of walls?

There are two types of walls: load-bearing and non-load bearing.

  • Load-bearing walls carry the weight of a building’s structure. They’re often made from concrete, brick, or stone.
  • Non-load-bearing walls do not carry the weight of a building’s structure. They can be made from any material but commonly use drywall or metal studs for framing (called “stud” walls).

What is the most common wall material?

The most common wall material is concrete masonry units (CMU) made of poured or precast concrete. These units are commonly used for framing and infilling on walls, floors, and roofs. AAC blocks are also used in CMUs, but they’re made from aerated concrete that’s lighter than conventional concrete blocks. ICFs are hollow blocks filled with insulation; they can be used as studs or exterior sheathing on walls or ceilings. SIPs are made up of polystyrene insulation sandwiched between two layers of oriented strand board (OSB); they’re used in walls and roofs as well as flooring systems like I-joists and laminated veneer lumber (LVL). Timber frame construction uses a timber skeleton to support the building’s structure; this type of system is popular in countries where wood is readily available at low cost.

Materials needed for Commercial Building Wall

  • Concrete
  • Blocks
  • Mortar
  • Steel
  • Glass/windows
  • Wood/plank or other materials as per building plan and design.

Tools needed for Commercial Building Wall

  • Hammer
  • Level
  • Tape measure
  • Utility knife, chalk line, and/or tape measure for cutting insulation panels and electrical conduits to length. Also if you’re installing wiring in the walls you’ll need a stud finder.
  • Safety glasses, safety gloves, and a dust mask to protect yourself from debris, dust, etc.

Cost of Commercial Building Wall

Commercial Building Wall costs vary depending on the type of wall you choose to install. For example, if you’re interested in installing brick pavers or stone veneers, expect to pay a higher price than if you were simply going with basic concrete block walls. Before committing to any specific material, it’s important to get an estimate so that you know how much money will be required upfront and how much maintenance is required down the road.

If your building has multiple stories and will require scaffolding during construction, this can increase both labor costs as well as the overall expense of Commercial Building Wall installation by quite a bit especially because scaffolding needs to be taken down after each day before continuing again tomorrow.

The material cost of a Commercial Building Wall

The material costs of commercial building walls vary widely, depending on the type of wall you choose. The cost of a CMU wall will be the lowest and can range from $5 to $20 per square foot. AAC and ICF walls are slightly more expensive but still less than SIPs, which typically cost between $10 to $40 per square foot. Timer frames are typically more expensive than CMUs or ICFs at around $80 to $100 per square foot, while SIPs can range from $50 to as much as $200 per square foot.

There’s also another factor that affects your total project budget: labor costs. Labor accounts for 60% of construction costs in general so hiring a skilled mason or carpenter is essential if you want a high-quality result at an affordable price point.

The labor cost of Commercial Building Wall

Labor cost is a major component of the total cost of a building wall. If you’re building a commercial building, the type of wall you choose will affect your labor costs.

A simple exterior wall with a minimum amount of detail can be built by one person in about two days. More complex jobs will require more man-hours to complete and may involve several people over several weeks or months. Labor costs for prefabricated walls are often lower than those for custom-built walls because they are shipped ready-to-go and require less installation time.

If you hire someone who specializes in commercial construction, their expertise allows them to review plans and suggest alternative materials that could save money in the long run (for example: purchasing cheaper insulation instead of more expensive but higher-performing options).

Maintenance tips for Commercial Building Wall

Cleaning the walls regularly is a very important task. You need to clean the surface of the wall and remove any dirt, stains, or debris that may have accumulated over time. To do this you can use a soft brush and apply a mild detergent on the surface of your commercial building’s walls. Avoid using any abrasive cleaning materials on your commercial building’s walls as they may cause damage to its surface.

This article is about the different types of walls used in commercial buildings.

A commercial building wall is a structure that encloses and separates the interior spaces of a building. Modern commercial buildings use a variety of materials to construct their walls, including concrete, stone, brick, and steel. The material used in the construction of the commercial building wall can help determine its cost.

The type of material you want should be based on what is going on inside your business and how much you want to spend on it. Here are some basic guidelines to help you make an informed choice.

In Conclusion

The commercial building wall types that we have discussed in this article are just a few examples of how you can use smart materials to solve problems. The best way to get started is by looking at your own building, and asking: what kind of problems do I have? Which ones will be easiest to solve with smart materials? What are some of the options that exist today? Then you can start exploring what might be possible in the future.

Leave a Comment