Cost To Build A Bulkhead

A bulkhead is a wall that separates a ship’s cargo hold from the rest of the ship. Bulkheads are usually made of steel or another solid material, but can sometimes be made of wood. They can also be built to be watertight, which means that they will prevent water from entering the cargo hold in case of flooding.

Bulkheads are necessary for seafaring vessels because without them, a single leak could spread throughout the entire vessel and cause it to sink. This would be disastrous for any seafaring vessel and its crew, so builders take great care when designing these walls so that they will not allow water to enter the cargo hold in any way possible.

If you’re looking to install a bulkhead in your home, you’ve come to the right place. We’ll cover everything from what a bulkhead is, how much it costs to install one, and even how you can do it yourself if you’re up for the challenge.

What Is A Bulkhead?

A bulkhead is a wall that separates the interior of a boat from the outside. It prevents water from entering the boat, and it can be designed to be removable or permanent. Bulkheads are usually made of wood, steel or aluminum.

How Much To Install A Bulkhead?

Installing a bulkhead on your boat is a major project that involves cutting up the hull of your boat, and it’s not something that you should take lightly. It can be done by professionals or DIYers, but professional bulkheads are almost always more expensive than DIY ones.

A quote for an installed professional bulkhead will vary depending on how much material you need (and whether you need any special features such as cut-outs), as well as how intricate the installation is; however, we have seen quotes ranging from $1250-$5000 for new construction and $250-$800 for retrofits. A typical price range is somewhere between about $800-$1200 per linear foot of wallboard—or about $3100-$6000 total.

If you’re going to do this project yourself, plan on spending a lot of time preparing your work area and setting up shop outside where there’s plenty of room and good ventilation (it gets smelly). But even if you don’t have carpentry skills or tools available to help get started with building your own walls from scratch—or just want someone else to handle all those details so they won’t slow down construction—you could probably find ways around these inconveniences: perhaps renting space at a local home improvement store or lumberyard would be easier than trying to set up shop outdoors? Or maybe hiring out only some parts like framing materials might let them know exactly what needs doing without needing too much extra equipment?

Is Installing My Own Bulkhead Possible?

You can install your own bulkhead. However, you will be saving money by hiring a professional to do it for you. You will save time as well. This is because installing the bulkhead yourself requires that you purchase the materials and tools needed to install it properly.

It is not difficult to install a bulkhead if you have enough time, patience and energy but it is better to hire someone else who has done this before so that they can do all of the work while you relax at home or go out with friends

How Much Does a Seawall Cost?

The cost of a seawall depends on the materials used and the size of the seawall. Seawalls are typically made of concrete, steel or aluminum. Concrete seawalls cost more than steel or aluminum because they are heavier and harder to install than other materials. The cost of a seawall also depends on where you live and how big your property is.


The design phase is perhaps the most important part of building a bulkhead, as it is where you determine the size and shape of your property. You will also need to take into account the type of materials that you want to use.

Designing a bulkhead requires some basic knowledge of construction methods and materials, but there are many websites that can help guide you through this process successfully.



How long does it take to build a bulkhead? It depends on the size of the project and your skills, as well as what kind of materials are used. You can have a contractor do the work for you, or you can do it yourself if you have the skills. The following is an overview of how much time and money are involved in each scenario:

Employing a Contractor

The time required for this type of work varies greatly due to its complexity and size. In general, however, building construction projects typically take four months or less for completion (though larger ones may take up to six months). As far as cost goes, hiring an experienced contractor will cost between $3-$12 per square foot depending on factors such as design detail and location (the more expensive areas tend to charge higher rates). The average wall costs around $9 per square foot; thus if your bulkheads measure 500 square feet total they would come out somewhere around $4500-$7500 total—not including labor which must also be factored into these numbers because contractors usually require hourly wages plus materials fees when working with them instead of doing everything yourself at home without any help whatsoever so consider that aspect carefully before committing fully either way.


Concrete is a great choice for bulkheads. It’s sturdy and easy to work with, and it has a long lifespan. However, because concrete takes time to cure, it’s not the best option if you’re working on a slope or have an urgent need for your bulkhead.

Steel and Aluminum

Steel and aluminum are the most common materials used for bulkheads. Steel is more durable than aluminum, but also heavier and harder to install. Aluminum bulkheads are lighter, easier to install and much less expensive than steel ones. Both materials can withstand waves and ice as well as they can withstand the pressure of being submerged in water or buried underground.


Wood is the most expensive option, but it has many benefits. Wood is more environmentally friendly than aluminum or steel. It’s also more flexible, allowing for bulkheads to be installed in areas where they can be easily removed when needed. This makes wood bulkheads great options for docks that are used seasonally and will only need to support the weight of water during certain times of the year.

Wooden bulkheads are strong and durable, which makes them perfect candidates for seawalls as well as docks that stretch across large bodies of water like lakes or rivers (and there’s plenty of those around).

We cover how much it costs to build a bulkhead and how you can install one yourself.

When it comes to bulkheads, there are two types of bulkheads: the ones you install yourself and the ones that cost a fortune. The DIY route is clearly more affordable, but can be time-consuming and challenging if you have no prior experience with construction projects. Hiring a contractor will obviously bring added costs, but if you’re not into DIY work then this may be your best option. Regardless of which route you choose to take, we hope this guide helps.


The cost of a bulkhead depends on the type and size of your project. Your budget will also determine if you want to hire a professional or do it yourself. In general, we recommend hiring a contractor for jobs that require more specialized skills or equipment than what most homeowners have at their disposal. You can compare prices among contractors by using our free service to contact multiple businesses at once.

Leave a Comment