Cost To Build A Dock With Boat Lift

If you are looking to build a dock with boat lift, we can help. We offer a wide variety of docks that are perfect for both your home and your business. It’s important to know exactly what you want before you start building. That way, we can make sure that everything goes smoothly and that your dock is exactly what you had in mind.

We also offer different types of dock construction materials. This includes wood, steel, aluminum, and composite materials like fibreglass or PVC plastic. Our expert team will help you make the best choice for your needs and budget.

Average Cost of Boat Docks

The cost would depend on what type of dock you want to put up in the first place as there are several types to choose from. But according to, the national average cost to build a dock through a contractor is $3,396 but could range from $1,400 to $7,000. The high-end permanent types could be as much as $30,000 to $50,000 depending on the size of the project.

What is a boat lift and why would you want one?

A boat lift is a mechanical device that lifts and lowers boats into and out of the water. It’s a cost effective way to store your boat, especially if you don’t have space for a trailer. They can be installed on docks or floating platforms, and there are many different options available to accommodate any storage needs.

Dock installation labor costs by type/size

The cost to install a dock also varies by type, size and location. For example, labor costs for installing a new dock with a boat lift will be different than installing a replacement dock. A replacement dock is usually smaller than an original one because it has been in place for years but needs some repairs or updates.

Installation of large docks (over 50 feet long) can be very expensive because they require multiple workers to complete the job safely in less time than smaller ones do. Smaller docks (10-30 feet long) may only require one worker at most during installation while larger docks may need anywhere from two to ten workers depending on their size, complexity and materials used throughout construction processes as well as how quickly contractors want them installed within a certain timeframe so that customers don’t have wait too long before using their newly purchased product(s).

Dock accessories and upgrades that may add to the cost

Dock accessories and upgrades that may add to the cost

The following items may add to your dock’s final price tag:

  • Dock lights. If you’re installing a dock for your boat, you’ll need lighting set up so you can see when you come home at night. These lights will be installed along the sides of the dock and are typically wired into an existing electrical box on shore. The average cost for this type of project is $1,000-$2,500 depending on how many fixtures are needed and what other materials have to be purchased.
  • Benches. Benches are great additions to any dock because they offer seating options for guests as well as storage underneath (you can tuck away life jackets or fishing gear here). A bench project costs between $200-$400 per linear foot installed with labor included in that estimate; this includes tools and materials needed for installation plus any permits required by building codes in your area

Does your location add to the cost of a dock or boat lift?

The cost of building a dock will depend on three main factors: your location, the size and complexity of your project, and the type of structure you choose. In some cases, these factors may also determine how much it costs to build a boat lift with your dock.

A remote location will increase the cost of building a dock because it makes shipping materials more difficult or expensive. Additionally, if you are building near an existing marina or harbor but far from shoreline access points (such as roads), there may be additional expenses for construction materials, equipment rentals and labor costs due to transportation difficulties. A custom-designed boat lift can add significantly to these expenses if there are no standard options available for purchase off-the-shelf at local hardware stores; however, lifted docks can also be built in less populated areas where there are fewer restrictions on waterfront development projects such as setbacks from property lines or zoning ordinances dictating how close certain structures can be built next door before being considered unsafely close together along exposed waterfronts near high tides/storms etc..

Where can you find an experienced dock builder?

If you want to find an experienced dock builder, there are a few things you should keep in mind.

  • First, make sure they’ve built a dock before. If they haven’t, they may not be able to give you the advice and counsel that will help you avoid common mistakes and save money.
  • Ask them how many docks they’ve built and where those docks are located. The more experience they have with these projects, the better equipped they are to answer your questions about costs and timeline.
  • Check their references. Once again: if someone says “Oh yeah I’m great at this” but doesn’t have any previous work experience or verifiable references (like people who can vouch for their quality of work), then take this as a red flag and look elsewhere for someone who has been through similar projects before.

Types of dock

There are several different types of docks to choose from, each with its own advantages and disadvantages. The most common types are:

  • Pier – A pier is a solid structure extending into the water. It can be made out of wood, concrete or steel and often has pilings (posts) driven into the bottom of the waterway to support it. Pier construction typically requires heavy equipment and extensive planning due to its size and scope, but they tend to last much longer than other dock designs if properly maintained and built according to specifications by a licensed contractor.

2 . Float – A float is constructed from materials that won’t sink in water such as hollowed logs or blocks placed on top of each other along an existing shoreline or submerged in shallow areas where tidal fluctuations might cause damage if left unprotected by something more substantial than just sandbars or gravel beds below them over time due because there’s less resistance between those materials versus concrete blocks would have when trying 3 . Boat Lift – A boat lift uses a hydraulic system powered by electricity so it doesn’t require any manual labor other than operating controls inside your home garage door opener remote control console which makes it easy for anyone who wants access on their own terms without having worry about hiring someone else do all work needed before using their dock system again after docking period ends…


Materials are the most expensive part of building a dock. If you’re going to reuse, recycle or repurpose materials you already have, then your cost will be considerably lower. Materials can be found locally if you live near a hardware store or lumber yard and online if not. Discount retailers offer steep discounts on high-quality products while bulk retailers like Costco often sell higher quantities of items at lower prices than local stores do.


Labor costs can vary widely depending on the contractor you choose. The best way to reduce your labor costs is by selecting a builder who has experience working with docks and lifts. This will allow them to employ the most efficient techniques, saving you time and money in the long run.

You should also make sure that any contractor you hire is insured against injury or property damage while they’re working on your dock project.


You will need the following equipment:

  • A boat lift. The most basic model will have a set of cables that lift the boat out of the water, but you can get fancier versions that include hydraulic pumps for lifting and lowering the boat at your convenience. If you want to keep things simple and use a manual cable-operated model, make sure it has enough power to lift your boat safely when fully loaded with passengers and gear.
  • A motor to drive those cables (or other mechanisms). This may be included in your dock’s design or purchased separately as an add-on accessory. You’ll also need space on land where you can install this motor and connect it to shore power so that it operates properly when needed.
  • Cables or ropes with pulleys attached at both ends; these will attach around each side of your dock and allow you raise/lower boats up/down into/out of water below them once they’re connected onto motors located beneath each end piece as well…

Boat Dock Plan

A boat dock plan is an important part of your dock project. It provides a detailed layout and design of your new dock, including its exact measurements and all the parts you’ll need to build it. Having an accurate plan will help keep costs down and make sure that everything goes smoothly when building.

Why You Need One

Whether you’re planning on building a floating or submerged dock, having an architectural drawing of your project is critical to getting the right materials at the right price. It also helps determine how much labor will be involved in building the dock itself. If something isn’t clear from looking at blueprints alone then talk with someone who has experience in this type of work before proceeding further so they can advise what might happen during construction even if everything seems fine on paper.

Clean up and disposal

Cleanup and disposal costs vary greatly depending on the size of your project, but generally these costs can be broken down into two categories: trash removal and post-construction clean up. Trash removal is relatively straightforward; you pay a company to collect your construction waste and haul it away. Post-construction clean up may seem like an afterthought, but it is important for several reasons. First, if you don’t clean up properly after your dock construction project has finished, you’re at risk for attracting pests such as rodents or insects (not to mention being fined by local authorities). Second, having an unkempt site can make potential buyers feel uncomfortable about buying the property in its current state. Finally, keeping things tidy helps reduce future expenses by making repairs easier when they are needed.


The second most common question we get asked is how much electricity you will need. It’s a good question because it can have a significant impact on your monthly electric bill and make-or-break your dock building project. There are two types of docks that require electricity: the type with a lift or hoist, and those without.

If your dock has an electric boat lift, you will need to generate enough power for both the lift and any lights or other electrical accessories on the dock itself (such as speakers). The best way to find out exactly how much electricity you need is through an electrician who can do a load calculation for you based on what equipment/items/devices you want to install on or near your boat lift so that he or she can advise how large of an inverter (the device used to convert 12V DC into 120V AC) would be necessary if there isn’t one already installed in the utility box by default when they purchase one from him/her too available at lowes hardware store etc..

Dock Lights

This is an optional step, but it’s a good idea to add dock lights if your dock will be used at night. This will help people see the dock in low light conditions, and it can provide some illumination for those who need to find their way back to shore when they come back from boating.

Additional structures

There are a number of ways to use your dock. In addition to adding a boat lift, you may want to add other structures such as benches, storage areas and lighting. Benches can be great for resting in between swims or fishing expeditions; they also provide an extra place to sit while in the water. Storage units are useful for holding equipment like life jackets and fishing poles so they’re always at hand when needed. Piers are another way to add extra space if you need it—you can even install stairs so that people who don’t feel comfortable in the water can easily get on and off the dock on dry land.


Benches are a great way to add storage and extra seating. Use benches to create a small sitting area, or place them in front of the entranceway to your dock to provide dry space for storing shoes and other items. Benches can also be used as storage areas themselves. Keep all of your boating equipment on the bench below deck, so you don’t have to worry about losing it when you’re underway.

Make sure that you get benches that are the right size for what you want them for, though—you don’t want them so large that they block access or visibility around the dock area.

Don’t forget to account for the cost of permits and insurance.

Don’t forget to account for the cost of permits and insurance.

You will need permits, and they can be expensive. Some places require building permits and others may require a separate zoning permit or even special permission from the city council. You should also know that you may need to file for an environmental impact statement in some areas if your dock is located near protected waters or wetlands. Insurance is also required in many areas, although it can be expensive depending on where you live; plan on $2-5K per year depending on your location and how much coverage you want (most insurers will let you pay quarterly). Don’t forget about the cost of the boat lift itself. Take note of this number so that when it comes time to build out your budget, everything checks out as planned—and enjoy having a beautiful new addition to your property.

In conclusion,

Your boat lift will be an investment in your time and money, so it’s important to think about the cost of installation. However, there are many factors that go into determining how much a boat dock should cost. Consider your location when deciding where to install your new dock or boat lift. If you’re looking for professionals to build one for you, contact an experienced contractor who has experience installing docks and other structures.

Leave a Comment