Cost To Build A House In Nc 2016

The cost to build a home in North Carolina varies chiefly depending on the size of the house. The average cost per square foot for a 1,200-square-foot home is $125 and $65,000 for an owner/builder; $155 per square foot or $83,000 for a 1,800 square foot home built by contractor; and $175 per square foot or $98,000 for a 2,200 square foot home built by contractor. Site costs are not included in these figures because they vary greatly depending on where you build your house.

The total cost to build a house in North Carolina can vary widely, depending on many factors. These include whether you hire professionals for the entire process or undertake the project yourself; if you decide to buy land and use your own house plans; and what type of home you want to build. Regardless of which option you choose, there are common expenses that must be considered when estimating the total cost. These include:

  • Land and permits
  • Fees (for engineering surveys, zoning approvals, and inspections)
  • Foundation costs (including site preparation)

How Long Does It Take To Build A House In Nc

The time it takes to build a house depends on the size and complexity of the design, as well as the contractor you choose. It is also important to consider that building a house is not exactly like making toast or boiling water; there are many factors which can affect how long your project takes.

How much would it cost to build my own home?

Building a home can be an exciting and rewarding experience, but it’s important to know what kind of budget you need in order to get started on the right foot. By using our calculator below, you can enter some basic information about your proposed structure (i.e., number of bedrooms/bathrooms) and we’ll provide an estimate based on recent projects similar in scope.

$125 per square foot or $65,000 for a 1,200-square-foot home built by an owner/builder;

If you’re considering building your next house, here are some figures to help you get started with the numbers. If you’re planning to build a 1,200-square-foot home in North Carolina, then your costs will be:

$125 per square foot or $65,000 for a 1,200-square-foot home built by an owner/builder; this includes the cost of land and construction

$155 per square foot or $83,000 for an 1,800 square foot home built by a contractor;

The average cost to build a house in North Carolina is $155 per square foot or $83,000 for an 1,800 square foot home built by a contractor;

  • The average cost to build a new single-family detached home in 2017 was $337 per square foot (or about 6 percent higher than 2016). This represented the largest annual increase since 2013.
  • Construction costs vary significantly depending on where you live within the state and on what type of home you want to build. For example:
  • In the Raleigh metro region, it costs more than twice as much ($286 per square foot) as it does in Charlotte ($129 per square foot).

$175 per square foot or $98,000 for a 2,200 square foot home built by a contractory.

The cost to build a home in North Carolina will depend on your budget and what you’re looking for. A smaller, 1,200 square foot home built by a contractor could cost as little as $65 per square foot or $40,000. The price only climbs from there though, topping out at around $100 per square foot or $75,000 for 2,200 square foot home built by contractory.

The average price to build a new home in North Carolina is about $112 per square foot ($288,000 for 2,500 sq. ft.). This does not include land or any site costs.

The average price to build a new home in North Carolina is about $112 per square foot ($288,000 for 2,500 sq. ft.). This does not include land or any site costs.

The cost of building your own home is quite different from the cost of buying an existing house, because it includes all the materials needed to construct the structure yourself. The first step in figuring out how much it will cost you to build your own abode is finding out what areas are available in North Carolina that meet all your criteria: type of lot (whether you want one with trees or views), size (how many bedrooms and bathrooms), etc.

Cost Of Land

When you start to build a house, the cost of land is not included. If you’re looking for a place to build your dream home, keep in mind that the cost of land can vary greatly depending on where you choose to live. For example, if you want to buy a home near Raleigh-Durham International Airport (RDU) or Research Triangle Park (RTP), it’s likely that the cost of building and living there will be higher than living in another part of North Carolina. However, if you’re willing to commute an hour or two each day by car or public transportation system like Amtrak or Greyhound buses respectively then there may be affordable housing options available closer by which might save money overall when compared against buying something closer but more expensive.

If all else fails try negotiating with real estate agents directly before submitting offers through Realtor websites so they don’t get any commission from A Bidding War Or Open Houses.

Permits and Fees

Permits and fees are a significant part of the cost of building a house. They’re required for all work done in and around your property, such as plumbing, electrical work, HVAC installation, etc. The cost varies by municipality but can be as much as $5 per $1000 or more. You will need to obtain permits for the following:

  • Foundation (if you build your own)
  • Roofing materials
  • Electrical service wiring (fixtures & breakers)


The foundation of a house is one of the most important parts of the building process. It is the base on which everything else is built. The foundation should be built on solid ground, or it could shift or sink over time and cause major damage to your home. It should also be strong enough to support the weight of your house and any additions you plan to make in future years (such as an attic).

Check with your local building codes as well: there may be restrictions on how large a foundation can be, for example, which could affect how much space you have for other things like bedrooms and bathrooms.


Lumber is the most expensive material used in a house. Lumber is a natural resource that comes from trees. It is a renewable resource, meaning that as long as trees are being cut down, they can be replaced by more trees growing in their place. There are many different types of lumber and each one has its own unique characteristics. For example, southern yellow pine is soft with a straight grain pattern while eastern white pine has smaller knots than southern yellow pine and it grows taller than northern white pine does.

Lumber comes in many different sizes: it can be 2×4’s (2 inches by 4 inches), 2×6’s or 2×8’s; 1×4’s or even 1×12’s; 4×4 or 8×8 posts; etc., which all have different lengths depending on what type of building project you’re working on (e.g., framing walls versus siding). Lumber also comes in various lengths such as 8-foot boards but sometimes you’ll find 10-footers too—it all depends on how many pieces you need when building something like framing out walls before installing drywall sheets onto them later down-the-road.


The cost of concrete is directly proportional to the amount needed. If you want to know how much concrete your house will require, then multiply the square footage of your house by 1/3 (for example, a 2,000-square-foot home would need 2,000 x 1/3 = 2 x 3 = 6 cubic yards).

Concrete costs per yard vary based on location and availability. In North Carolina, it’s approximately $1 per cubic foot; in Florida and California it’s around $1.05 per cubic foot; in Texas it costs $1.12 per cubic foot; and so on.


Drywall is a building material used for interior surfaces of buildings. It is made from gypsum plaster, which is pressed between two thick sheets of paper. Drywall is not a mineral; it is classified by the United States Department of Energy as “non-mineral sand” and comes from rocks like shale and clay that have been heated and turned into plaster. This means that drywall has a high recycled content (about 35%).


The cost to build a house includes the cost of all materials, labor, permits, and other project costs. One way to reduce your budget is by choosing a less expensive flooring material than hardwood. Flooring options you can use are:

  • Hardwood flooring
  • Laminate flooring
  • Ceramic tile flooring
  • Vinyl flooring (vinyl sheet or vinyl plank)
  • Carpet


Siding is the exterior covering that protects a house from the weather and enhances its appearance. Siding is made of either wood or metal, and it can be installed over an existing wall structure or as part of new construction.

Siding comes in many shapes, sizes, colors, textures, and materials. Wood-based siding is often referred to as “clapboard” or “shakes”; vinyl siding has many different names including aluminum (and other metals), PVC (polyvinyl chloride) and composite material; brick veneer may be laid over plywood sheathing; cement stucco is poured like concrete over plywood sheathing; faux stone veneer is attached with adhesive backing onto backer boards which are then installed on top of framing studs after the walls have been constructed; etc.


There are three types of insulation used in homes: fiberglass, cellulose, and foam. Each type has its own benefits and drawbacks.

Fiberglass insulation is the most common type of insulation found in houses. It’s made from recycled glass fibers encased in plastic or paper. When installed properly, fiberglass can provide excellent thermal protection while preventing air infiltration and noise transfer through walls. Fiberglass makes a great choice if you’re looking to save money on your energy bill while still providing good thermal protection for your home.

Cellulose insulation has been around since the 1930s but is now being replaced by newer technologies such as spray foam or rigid boards due to its high moisture absorption rate which can lead to mold growth over time if not properly maintained (i.e., cleaned regularly). However, cellulose does offer some advantages over other options such as being easy-to-install with no special equipment required; having low installation cost; requiring little maintenance (i.,e., cleaning); offering superior sound reduction capabilities compared with traditional materials used today like wood paneling or gypsum board panels; being eco-friendly due to its recycled content–meaning less waste going into landfills.


Roofing is one of the biggest parts of the home-building process. When you buy a house, you will have to pay for roofing materials and the labor to install them.

You can get your roof done by yourself or hire a professional. If you do it yourself, there will be less cost involved in hiring someone else because they charge per hour instead of per square foot. However, if you want better quality work and are willing to spend more money on materials, then hiring a professional would be the way to go here.

Exterior Walls

Exterior walls are the walls of your house that are exposed to the outside. It’s important to note that exterior walls do not include interior partitions like bathrooms and hallways, which are called partition walls.

Exterior walls can be made from brick, stone, or wood. You can also use vinyl, aluminum, or fiberglass siding for your exterior walls if you don’t want a brick or stone look for your home. Exterior insulation is usually required on all new homes; this helps reduce energy costs associated with heating and cooling temperatures indoors during seasons when it gets too hot or cold outside (i.e., Spring/Fall).

Doors and Windows

Windows and doors are often the most expensive part of any home. They can be made from a variety of materials, in many different styles, and can even be custom-built to suit your specific tastes. You should also consider how much energy will be needed to heat or cool your home when choosing windows and doors for it.

The cost of windows is determined by their size, style (single-hung or double-hung), quality of material used as well as where you live because prices vary depending on geography. For example; if you’re building in NC then expect to pay more than if you were building in Phoenix Arizona. Windows come with many different frames such as wood frames; fiberglass frames; aluminum framed with vinyl siding etc.. Most people don’t think about this but they should because having vinyl siding on top means that there won’t be any maintenance needed like painting every year which saves time AND money. There’s no way around it though – these things DO cost money upfront before anything else gets done so keep that in mind when budgeting.

Doors come in all kinds too like solid core versus hollow core door types(better insulation), steel vs aluminum(more durable), wood versus composite materials(lighter weight while still being strong) etc… In general though most people prefer wood due to its appearance hence why pine trees were chopped down long ago 😉

Interior Finishing

  • Furniture.
  • Carpet.
  • Paint.
  • Fixtures (lights, hardware, etc.).
  • Cabinets and countertops.


The heating, ventilation and air conditioning (HVAC) systems are a critical component of any home. These systems provide the heat and air conditioning that makes your home comfortable and livable in all seasons. The HVAC system can become expensive to replace if it breaks down or does not run efficiently.

This is especially true if you install a geothermal HVAC system that uses your own natural resources to provide heating and cooling for your home. Geothermal systems are efficient because they don’t use fossil fuels but instead use ground water for their energy source which circulates through pipes buried underground near your house or yard. The water is then used to power the compressor-like device located outside on top of an oiled pad where it will collect dirt over time so be sure to clean this area periodically with soap and water so there isn’t too much humidity around any electronics when they’re plugged into outlets nearby since they could short circuit due to moisture damage caused by condensation inside metal components (e.,g., fuses).

Electrical and Wiring

While electrical systems are a significant part of the cost of building a house, don’t forget about another large expense: labor. This can be a big part of the overall cost because electricians need to wire your entire home with outlets, switches, lights, and other electrical devices. You may also have to spend money on materials such as wiring or conduit pipe that run through the walls and ceilings.

Plumbing System

Plumbing System

The plumbing system is an important part of the house that you can’t see, but it is crucial to have working properly. The plumbing system includes pipes and fixtures that transport water, waste, and other fluids through your home. The pipes can be made of copper, PVC or PEX pipe materials; each type has different advantages depending on the application.

In conclusion,

The average price to build a new home in North Carolina is about $112 per square foot ($288,000 for 2,500 sq. ft.). This does not include land or any site costs.

Leave a Comment

error: Content is protected !!