Cost To Build A House In Sacramento

Sacramento is the capital city of California and the most populous city in California. As a major metropolitan area, it is also one of the fastest growing cities in America. In fact, Sacramento’s population grew by nearly 38 percent between 2000 and 2010 alone.

Located on the banks of the Sacramento River, this large city is home to more than half a million people who enjoy an active lifestyle while still taking advantage of nature at every opportunity they get. Located near several national parks and waterways, Sacramento has plenty to offer people looking for outdoor activities such as hiking or water sports as well as those who prefer shopping or going out on dates with friends over dinner at some fancy restaurants downtown—or even just enjoying fresh air while sitting outside reading a book on their porch swing.

Building a home can be an exciting and rewarding experience, but it also comes with its own set of challenges. There are so many different factors that go into building your dream house — all of which will affect the final cost of your project. If you’re considering building a home in California (or just curious how much it would cost to do so), then this guide is for you. In this article, we’ll walk through each part of the process, including everything from your land costs to what type of insulation you should use on your roofing materials. We’ll even show you how much each element typically costs so that you know exactly how much money it will take to create your perfect abode.

Cost To Build A House In Sacramento

There are many factors to consider when estimating the cost of building a home, but you can usually expect to spend about $150 per square foot for a new custom home. This figure is a good average for the Sacramento area, but it’s important to note that this number can vary widely depending on what type of property you build and where you live.

When considering how much your house will cost, it’s also important to take into account hidden costs like permits and site prep as well as financing fees if you don’t want cash out of pocket at closing (or after closing). These fees can add up quickly: according to, each lender has different requirements and fees associated with buying or selling homes in Sacramento County and Placer County; however, they typically fall between 0.5% – 1% when applying through an online mortgage company like Quicken Loans or Fannie Mae (depending on credit score).

Additionally: if there were any other variables that could increase/decrease these numbers significantly from those presented above please let us know.

How much does it cost to build a 2000 sq ft house in California?

If you are looking to build a 2000 sq ft house in California, the following costs will help you get started.

Cost of land: $30,000

Permits and site prep: $7,500

Foundations: $10,000

Landscaping: $2,000

Cost of Land

The cost of land in Sacramento depends on the location of the property. The average price of a square foot for residential real estate was $555 in 2018, according to Redfin. This is higher than both Los Angeles and San Francisco, which were at $515 and $490 respectively in that same year.

So how much does it cost to buy land in Sorrento? Using this data as a guide, we can assume that the average price per square foot for residential lots would be around $400 or $450 per foot if your lot is located in one of those areas where most houses are built (around 30-40 minutes away from downtown Sacramento). If you want an acre with no restrictions on building size or zoning laws, then you should expect to pay around $7500-10000 per acre (or around $200-$250 per square foot)

Permits and Site Prep

The process of building a house in Sacramento isn’t restricted to the land that you’ve purchased. In fact, it begins long before then.

Permits are required for nearly every aspect of building a house, from the foundation to the electrical system and plumbing. Since these permits will be needed regardless of who builds your home, they are not part of any builder’s budget. They must be paid by you or whoever owns the property where your home will be built.

Once you know what type of permit(s) you need, there are two ways that you can obtain them: self-permit or licensed contractor (through our team). The first option requires no money on your end because all costs are incurred by us; however, this method is slower than hiring an experienced builder like ourselves who already has relationships with inspectors throughout Sacramento County so there’s less time spent waiting around at City Hall getting things approved.


Foundations are the base of a house. They provide a sturdy foundation for the structure to be built upon, and they must be strong enough to support the weight of the house.

The main types of foundations are:

  • Concrete – this is the most common type because it’s affordable and provides a high level of protection from moisture and pests. One downside is that concrete can crack over time, but this can be avoided by installing insulation between basement walls so that no heat escapes into surrounding soil or air pockets beneath your home. If you want an even stronger foundation, consider using reinforced concrete instead.
  • Wood – wooden foundations are less expensive than other options but don’t last as long; also, they may need replacing every 10 years or so because termites tend to eat them up eventually (this applies especially if they’re treated with chemicals).


Landscaping can be an important part of the overall look of your house. Landscaping is usually done after construction, but it’s also possible to plan a good landscaping design in advance and have it built into your budget.

If you hire professional landscapers, they’ll charge an hourly rate or a flat fee to do the job. If you want to save money on your landscaping costs and do some of the work yourself, here are some tips:

  • Keep it simple. Don’t try to overdo things by creating something complicated that requires lots of materials or labor time; instead, focus on getting a few key elements just right so your yard looks great without spending too much money or effort.
  • Use plants native to Sacramento in order not only save money (native plants are generally less expensive than exotic varieties) but also because they’re better suited for our climate conditions and soil types


Framing refers to the skeleton of the house. It’s built before any walls go up and is meant to hold up the weight of an entire structure. Framing can either be made of wood, steel or concrete (called a foundation), but it’s always installed by carpenters or framers.


Drywall is a building material made of gypsum plaster that is applied to the interior surfaces of walls and ceilings. It is also called wallboard, plasterboard, or sheetrock (a term trademarked by USG Corporation). The name drywall comes from its ability to resist humidity and moisture better than other building materials such as plaster or wood.

Drywall is used in the construction of buildings where fire resistance is required, as well as for decoration and soundproofing in homes.


The cost of insulation to build a house in Sacramento is one of the biggest costs, and also one of the most important. It will not only reduce your energy bills, but also help prevent moisture damage to your home. Insulation can be installed in walls or attics. There are several types of insulation you can use for your home, including fiberglass and foam. This material can be expensive to install but will pay off by helping keep your home comfortable during hot summers and cold winters while also saving money on utility bills over time.

Exterior Finishes

The exterior of the house is what brings it to life, and finishing touches like a roofline and trim give it the right look. Most builders will include these in their base price for you, but if you want something more customized or unique than you might need to pay for them yourself. Here are some common exterior finishes:

  • Roofing
  • Siding (wood or vinyl)
  • Windows/Doors


Roofing is one of the most expensive parts of a house, and it can cost between $5,000 and $10,000. You’ll typically want to do this after framing is complete so that there aren’t any unfinished areas where you could get leaks. The materials used in your roof depend on the style of your home, but they will usually include shingles or tile and insulation.


HVAC stands for Heating, Ventilation and Air Conditioning. It’s a very complex system that requires a lot of work to install. You can choose between different types of HVAC systems like heat pumps, air conditioners and natural gas furnaces or electric forced air furnaces to heat your home.

While these systems are expensive to install, they will save you money in the long run by reducing heating bills during winter months and cooling bills during summer months.


One of the most expensive parts of building a house is plumbing. Plumbing can be broken down into three components: drainage, water supply and waste removal. The type of plumbing system you choose—gravity flow or pressure-assisted—will determine how much it costs to install in your new home. Another factor is whether or not you’re doing the work yourself.

If you’re doing all the plumbing installation yourself, expect to pay between $2,000 and $5,000 for materials alone (not including labor). If someone else is installing it for you, assume that they’ll charge between $1-$2 per foot or approximately $500-$1000 per day plus materials costs.

Plumbing is one area where it’s best to plan ahead because it takes time to order enough pipes and fixtures before construction begins so that they aren’t delivered after walls have been finished or windows installed.


Electrical wiring is one of the most basic building materials. It’s what powers your lights, plugs and outlets. When looking at electrical costs, consider that you should ideally have a licensed electrician install your electrical system as opposed to doing it yourself. This ensures that everything is done according to code and can avoid potential hazards with bad wiring or installation.

There are several different costs associated with electrical systems in a home:

  • Electrical Wiring – This covers the actual wires used for running electricity throughout your home and connecting it to outlets and switches around the house. The cost will vary depending on how many rooms need wiring but generally costs between $1 – $2 per foot of cable run (which includes overhead power lines).
  • Light Fixtures/Outlets – These are also considered part of the “electrical system” since they connect directly into them (instead of being connected directly onto walls). These can be installed by homeowners themselves but if you don’t feel comfortable doing this yourself then it would be better if someone else did it for you instead. Depending on what type of light fixture(s) or outlet(s) are needed will depend on how much each unit costs; however most homeowners find themselves spending somewhere between $65-$150 per fixture depending on how fancy they want their light fixtures/outlets to look like.

Interior Finishes

Interior finishes can also be costly. For example, cabinets, flooring and countertops are usually done after the framing is complete and may account for a significant portion of your home’s total cost. If you’re planning on doing these yourself, consider looking online for deals on materials. If you’re hiring a contractor to do the work for you, it’s important to understand how much each item will cost before signing on with them—and be sure that they’ll give you an estimate based on actual material costs rather than just their labor rate (which can vary greatly).

There is a lot involved in building a home, so it’s important to go over everything beforehand.

When you’re planning to build a house, it’s important to know exactly what you are getting into. You should know how much it will cost and what the process will be like. You also need to be sure that your builder is trustworthy and reliable, as well as keeping track of their timelines so that your home is done on time. Finally, there are many considerations when choosing materials for building—you want them to be strong enough and durable enough for the task at hand.

In conclusion,

While building a home is not a cheap endeavor, it can be done more affordably if you know what to expect. If you want to learn more about how much it costs to build a house in Sacramento and beyond, we invite you to contact us today. We’re always happy to share our knowledge with our customers so they can make informed decisions about their next project.

Leave a Comment

error: Content is protected !!