A wall-mounted fireplace is a popular alternative to a traditional fireplace, and can be installed over any existing wall. It’s a great choice if you live in an apartment or a condo and don’t have room for a free-standing fireplace.
A wall-mounted fireplace is basically a box that sits on an interior wall and contains the firebox and chimney, while allowing you to see the flames through glass doors. The doors are often surrounded by stone or brickwork so they look as if they’re part of the wall itself. The firebox may be gas or wood burning, and the flue can be either vertical or horizontal depending on how much space you have available for installation.
There are many reasons to install a fireplace in your home. For example, it can save you money on utility bills and provide you with a cozy and relaxing place to spend time with family and friends. The good news is that installing a fireplace is not as hard as you might think.
What is Diy Wall Mounted Fireplace
A DIY wall mounted fireplace is a really unique way to add ambiance and charm to your home. It’s great for small spaces and can help you save money by not having to install a traditional fireplace or use expensive space heaters. You can use it year-round, too.
Wall mounted fireplaces are easy to make and install. They’re also versatile in that you can add different elements for your own design aesthetic: things like mirrors, lights, paintings and other decorative objects will help make the most out of this type of focal point in any room.
Uses of Diy Wall Mounted Fireplace
There are many uses for DIY Wall Mounted Fireplace. Some of the common uses of a DIY Wall Mounted Fireplace are:
- A decorative piece in your home.
- A heating source for your living room, bedroom, or any other room in the house.
- A cooking tool to roast marshmallows, make s’mores, and other delicious treats.
- An insect repellent when you’re sitting outside on a summer night with friends or family.
Reasons for Installing Diy Wall Mounted Fireplace
There are many reasons why you should consider installing a DIY wall-mounted fireplace. The most important of these is that it can give the room in which it’s placed a focal point, giving it more character and making it look more finished. A second reason to install one is that they can be used to heat the room in which they are installed, something that can be very useful during colder months or if you live in an area where winters are especially severe. Finally, if you want to add a little ambiance to your home or office but don’t have enough room for an entire fireplace, then this would be another good reason for getting one installed.
Steps involved in Diy Wall Mounted Fireplace
- The first step is to measure the area where you want to mount your fireplace. You can use a 4-foot by 4-foot sheet of plywood as a template for this. If the fireplace is going on an exterior wall, make sure that it doesn’t get too hot and cause damage to anything underneath it.
- The second step is to buy all of the materials for mounting your hearth including:
- four 2 inch thick pieces of beveled cedar boards (about 8-by-8 inches)
- two 1/2 inch thick pieces of granite slabs (about 10 by 12 inches)
- two 3/4 inch wood screws (make sure they’re long enough to go through both boards)
- The third step involves cutting out four rectangles from each piece of lumber that are equal in size to those in your drawing above (i.e., one rectangle centered between each pair). Then drill holes into each board so you can secure them together later on using wood screws and glue if needed (you’ll probably need some). Once they’re done being drilled, place them against each other until they’re aligned perfectly before screwing them together at three different points per side with one screw head per corner space or joint point between matching corners; make sure all edges line up perfectly before tightening down any screws until snugly fitted together don’t worry about over tightening though because we’ll deal with securing everything else later on.
Place the tile on the fire board.
To make this project as simple as possible, start with a fireboard. It’s basically just a piece of wood with grooves that you can use to set the tiles in place. You’ll want to space them out so they don’t touch each other. Then, use a tile saw to cut the tiles into smaller sections for easier handling and installation.
Once you’ve got all your pieces ready, it’s time to fit them onto your fireplace wall. First, place spacers between the tiles using these spacers from Home Depot ($8). This will ensure that there is enough room between each piece for adhesive when we come back later on in this tutorial
Drill holes in the MDF board.
Now that you have your measurements, you can drill holes in the MDF board. The size of the drill bit will vary based on the size of your screws, but it should be slightly smaller than the screw so that it can fit through without being too loose or too tight.
Drill in the center of each tile and then move on to drilling into your wall mount frame. It is important to do this step before attaching anything else because if you don’t get this right, then all other things will go wrong as well.
Add spacers between the glass tiles.
Placing the spacers between each glass tile is a crucial step in ensuring that your fireplace is level, straight, and plumb. If you don’t use spacers, then it’s very possible that the tiles will start to slant. This can lead to problems later on when you’re trying to install doors and drawers.
Attach the MDF board to the wall mount frame with screws.
You will attach the MDF board to the wall mount frame with screws.
Use a drill to make holes in the MDF board and then use spacers between the glass tiles to attach them.
Add rigid foam insulation on top of a 2×3 frame, and then attach it to the wall studs on both sides.
Once you have the frame assembled, you’ll want to add rigid foam insulation on top of it. The foam can be cut with a knife or a box cutter, and then attached with spray adhesive. Once the adhesive is dry (give it at least 24 hours), attach the insulation to the frame by drilling pilot holes through the wooden pieces and driving screws into the studs behind them.
Afterward, you can either leave your fireplace as is (without any extra finishing touches) or go ahead and paint it white if you like.
Cut a piece of 1/2” thick MDF to fit over the frame, which will sit against the wall surface when installed.
- Use a table saw, or other cutting tools with a straight edge, to cut the MDF to size.
- Use a miter saw to trim the edges at 45 degrees (or another angle) so they match up perfectly with your 1×6 frame pieces and make sure that when mounted together, there are no gaps between them and the frame is flush against the wall surface when installed.
- Use a router to round all four edges of your piece using small bits (1/8” or smaller), taking care not to leave deep marks in your workpiece by having too much material remaining on each side of your cut line after it’s done routing this will help prevent splintering when sanding later on down the road.
- Finally – use a belt sander equipped with an 80-grit paper surface on both sides of each corner until smooth; go over all surfaces once again for good measure before moving on to the next step.
Attach the acrylic glass panel to the back of the MDF board with screws and spacers.
- Use the drill to make holes in the acrylic and MDF board, then attach them with screws and spacers.
- Use a screwdriver to screw through the MDF board into the acrylic glass panel, then add spacers between the two pieces of wood to keep them apart while you’re working on attaching them together. Make sure that you have space between each piece of acrylic so that there is room for your heater’s wires and other components later on.
Cover all seams with silicon caulk.
You can purchase silicon caulk at your local home improvement store. Silicon caulk is water-resistant, durable, and easy to apply. It’s a good choice for outdoor applications because it lasts longer than paint. If you don’t want to use silicon caulk then you could use a wood filler instead.
Advantages of Diy Wall Mounted Fireplace
- You can create a fireplace in any room.
- You can choose any size and shape, depending on your needs.
- No need to worry about venting.
- Use whatever fuel source you want.
- The cost is low compared to other fireplaces or heating systems.
- It’s easy to control the intensity of the flame, so you don’t have to fear accidentally burning down your house if it gets out of hand.
Disadvantages of Diy Wall Mounted Fireplace
While a DIY wall-mounted fireplace can be a great addition to your home, it does have some disadvantages. First, you may think that these fireplaces are not safe because they are not professionally built. However, this is untrue. While the materials used in these DIY projects may not be as strong as those used by professionals, most people who build their own wall-mounted fireplaces use materials that are safe and durable enough for daily use.
Second, if you choose to use an electric heater instead of gas or wood logs for your fireplace, it will be more expensive than using the traditional fuel options. You will have to invest in a special type of heater and pay for electricity even when it’s running full blast on a cold day.
Thirdly, there’s also the mess factor: once you start using your new DIY wall-mounted fireplace (which hopefully happens every night), expect ashes and soot everywhere. And if you don’t clean up after yourself often enough? Well then prepare yourself for months worth of dust buildup inside your chimney.
Fourthly is safety; make sure that everyone knows how much space they need around them before starting up any sort of fire indoors (especially one which is attached directly to another surface). If children find out about what’s going on then they might get too close while playing outside nearby they could easily burn themselves badly if they’re holding onto something while standing too close.
Materials needed for Diy Wall Mounted Fireplace
You will need the following materials:
- Tile for the firebox. Your local tile supply shop will have a range of sizes, colors, and textures of tiles that can be used to make a decorative surround for your fireplace. The most important thing is to make sure that you choose something with high thermal resistance that’s suitable for wet locations like the bathroom or kitchen.
- Tile for the surround (you’ll need double what you require). I chose black terracotta tiles because they look nice but this may not be something you want in your home so choose something else if you don’t like it.
- Fireboard – this is basically just another name for a firebrick which is used as an insulator between two walls that are going up against each other at 90 degrees (vertically). You don’t always need one if there’s already another material fitted between these two faces e.g., plasterboard, etc., but otherwise, it’s pretty essential if installing anything electric behind this wall such as lights or electric heaters.
Tools needed for Diy Wall Mounted Fireplace
Tools needed for Diy Wall Mounted Fireplace:
- Table saw (you can get away with just a circular saw if you have to)
- Circular saw (or reciprocating saw)
- Jigsaw or hack saw (for cutting the glass and other materials that aren’t very thick or dense)
- Miter saw table or handheld – used to cut angles in wood pieces
- Clamps – these will help hold everything together while you’re assembling it all. The more clamps the better.
- Screwdriver – make sure you have an assortment of sizes on hand as well as Phillips head and flat-tip screwdrivers.
- Tape measure, levels, and hammers will come in handy too.
Benefits of Diy Wall Mounted Fireplace
- You can save money. A DIY wall-mounted fireplace is much cheaper to build, as you don’t have to invest in a large cabinet or even hire professionals.
- You can customize it to your own style. A DIY wall-mounted fireplace gives you more freedom when it comes to choosing the materials and accessories for your fireplace.
- It is easy to install and maintain. Since there are no complex systems involved when setting up a DIY wall-mounted fireplace, you will be able to do it yourself with ease; this also means that there won’t need much maintenance after installation either.
Cost of Diy Wall Mounted Fireplace
The material cost for this DIY project is about $300, which includes:
- 1 sheet of 1/2″ plywood
- 4x4s for the base (purchase lumber along with a cut list from below)
- 3 4’X8′ sheets of 8mm fireproof glass (found at a local glass shop)
The material cost of Diy Wall Mounted Fireplace
For your convenience, we have provided a list of materials needed for the construction of a DIY wall-mounted fireplace. The total material cost for the project is about $200-$300.
- Fireboard: You can use any kind of fireboard, but we recommend using a fiber cement board (like this). It’s easy to work with, reasonably priced, and comes in several sizes.
- MDF board: You will need 2 sheets of 1/4 inch MDF for this project. We recommend buying solid core boards because they are more durable than particle boards or plywood. (We used these.) They’re not too expensive either, so buy at least 3-4 sheets if you want to build multiple fireplaces or just be on the safe side.
- Acrylic glass panel: This is what will let you see through into your home while still protecting it from heat damage caused by fireside candles or lamps placed next to them. For this purpose, choose one that has UV protection built right into its structure like these ones do without breaking too much bank 😉 Oh yeah – don’t forget some silicone caulk too. That’ll come in handy later on.
The labor cost of Diy Wall Mounted Fireplace
As you can see, the labor cost of this DIY project is not that high. However, you should still take a close look at your schedule and make sure that you have enough time to complete it. To ensure that everything goes smoothly, it’s highly recommended that you ask for help from family members or friends who are willing to lend their hands. If they’re not available, there are always professional contractors available online who can do the job for you at reasonable rates.
What base is needed for Diy Wall Mounted Fireplace
In order to mount your fireplace and get your new focal point up on the wall, you will need a backer board. There are quite a few options available for this. You can use a fireboard if you have access to one and it is in good condition. If not, you might have to purchase one online or at your local hardware store or home improvement center. A tile backer board would also be an excellent choice for mounting your fireplace if you decide that cement isn’t going to be too difficult of an application process for you.
A cement backer board is another option that comes highly recommended by many professionals who build fireplaces like this one every day around their homes or businesses because it is extremely durable and won’t crack when exposed directly against heat sources like fireplaces do during their normal operation period (usually between 6-8 hours per day). Cement backer boards tend not only to keep heat away from walls but also protect them from moisture damage as well so they’re perfect for any room where moisture levels may fluctuate throughout the year – especially bathrooms.
If none of these options seem right then consider using plywood instead since it’s less expensive than cement boards but still provides plenty of protection against heat sources like ours here today plus it allows us access underneath when we need some work done down there too.
Maintenance tips for Diy Wall Mounted Fireplace
- Clean the glass with a damp cloth to remove dirt or dust.
- Use a soft, dry cloth to clean the glass surface and its frame. You can also use window cleaner to achieve a shiny look on your Diy Wall Mounted Fireplace, however, avoid using strong chemicals as they may damage your fireplace’s surface or make it discolored over time.
- If there is any stubborn dirt stuck between the glass panes or frames of your Diy Wall Mounted Fireplace, you can use an old toothbrush dipped in mild detergent solution (e.g., dishwashing liquid) to remove them by gently scrubbing them off until all traces of grime are gone from all areas within reach of your brush’s bristles; rinse thoroughly when done cleaning each part separately before proceeding onto another section of your fireplace where more cleaning will be necessary later down the line here too .
4 . Once everything has been rinsed thoroughly , wipe away excess moisture from each piece so nothing remains behind except for freshness. Now we know how simple it is t maintain our beautiful handmade fireplaces 🙂
Creating a fireplace is not as hard as you might think.
If you’re looking for a way to create your own fireplace, don’t be discouraged by how big the task seems. It can be done with just a few tools, some materials, and lots of creativity.
You will want to begin by planning out where on your wall you want to place the fireplace. Make sure that it is far enough from any combustible materials so that when you light it up, it doesn’t catch anything else on fire. A good place would be at least six feet away from anything flammable such as curtains or furniture.
Next, check out Pinterest or Google images of mantels made from pallets these are great ways to get ideas for making one yourself without having to spend much money. You can also look into DIY tutorials online where people have created their own DIY fireplaces using different methods like attaching mirrors together instead of wood planks (although this might cost more if you need extra tools).
Diy Wall Mounted Fireplace can be a great addition to any home. You can make this project as simple or complicated as you like, depending on your budget and how much time you want to put into it. The most important thing is that your fireplace looks awesome.