How Build A Retaining Wall With Blocks

A retaining wall is a structure designed to hold back or restrain the movement of soil, typically due to erosion or sliding. Retaining walls are found in gardens, along roads and driveways, and at the base of buildings. They can be made from different materials, including bricks and rocks.

A retaining wall is a structure that holds back earth from a sloped area. The earth behind the retaining wall can be made up of soil, gravel, or stones. Retaining walls are commonly used for many reasons, including:

1) To make a flat area into a level one

2) To prevent erosion on a hillside or slope

3) To direct water away from an area where it may cause damage to your property or others’ properties

4) To create more usable space by creating flat areas in your yard

A retaining wall is a great way to do more with your yard by expanding your usable space and holding back slopes, while at the same time beautifying it. Retaining walls can be simple or complex, bold or subtle, and they can be done using many different materials to match your style. We’ll focus on using garden wall blocks for this project, which are perfect for creating a straight retaining wall that’s short enough not to require an engineer’s certification. Here are the steps you should take:

Dig a trench along the curve of your wall so it will be level. The ground should be cleared, tamped and smoothed to a flat surface.

  • Dig a trench along the curve of your wall so it will be level. The ground should be cleared, tamped and smoothed to a flat surface.
  • Use gravel to fill any gaps between the blocks; this will help stabilize them over time as they settle into place.

Lay your first row of blocks using a carpenter’s level to make sure they are even. Use crushed gravel and small stones to fill in any gaps.

Before you start building, lay your first row of blocks using a carpenter’s level to make sure they are even. Use crushed gravel and small stones to fill in any gaps. Then, lay down another row of blocks so that the top edges are offset by half the width of your block (or whatever thickness you want). The top layer will be flush with the ground on one end, but there shouldn’t be any gaps when you look at it from any other angle — like this:

Lay the rest of your blocks, tapping them into place with a rubber mallet and filling each layer with crushed gravel and small stones up to the top edge.

Lay the rest of your blocks, tapping them into place with a rubber mallet and filling each layer with crushed gravel and small stones up to the top edge. Use a mason’s line to make sure the blocks are level. Shifting and tapping the blocks until they’re level is easiest if you have two people: One person holds onto the mason’s line while another taps in place.

Stretch a mason’s line across the wall to make sure the blocks are set evenly, shifting and tapping them until they are aligned with the string line.

  • Mark the block locations on your wall with chalk so you can easily see where to place them.
  • Stretch a mason’s line across the wall to make sure the blocks are set evenly, shifting and tapping them until they are aligned with the string line.

Add an additional 2-inch layer of gravel behind and on top of your wall to stabilize it in case it shifts over time.

Once you’ve placed your first layer of blocks, add an additional 2-inch layer of gravel behind and on top of your wall to stabilize it in case it shifts over time. To do this, use a shovel to scoop out gravel from the space between the wall and the ground. Then move it into place using either a shovel or a garden hose (the latter method is recommended if you have access to one). Finally, use a rake to level out the gravel so that it’s even with your retaining block wall and flush with its top surface.

Retaining walls can be simple or complex, but if you follow these simple steps you will have success.

Building a retaining wall is simple, but it’s important to follow the steps outlined here. While you can build a simple retaining wall with no help, this project will go faster and be more stable if you add some additional components.

First, start by making sure that your blocks are level and plumb (perpendicular) to each other. A carpenter’s level is a good way to make sure that each block is at the same height, but if you don’t have one handy then use the top of your head as an indicator for where one side should be placed relative to another. You can also use a mason’s line or chalk line across two blocks as an additional check point before filling with dirt or gravel in order to keep everything straight during construction.

Next fill behind and on top of your wall with gravel so that it stays anchored in place once filled with soil; this prevents shifting which could cause your walls not being able to hold up as much weight as they should be able while retaining water runoff from heavy rainstorms

Conclusion

That’s it! Your wall is finished. Now you can sit back and enjoy the fruit of your labor. You’ve worked hard and deserve some praise for all your efforts. And remember, to keep your wall looking its best over time, you should seal it with a quality concrete sealer every year or two.

Leave a Comment

error: Content is protected !!