How Much Does It Cost To Build A House In Columbus Ohio

The cost of building a house in Columbus Ohio depends on many factors. It’s important to understand that this is not the same as buying a home, which will have its own costs and fees. When you’re building a house, you are investing in the land, subcontractors for different aspects of the project (framing walls, plumbing fixtures), and materials such as lumber or concrete (and if you’re going green it might include solar panels).


  • The first thing you need to consider when building a house is the land. Land costs are usually the most expensive part of construction and vary depending on your location and neighborhood.
  • The price of land can be affected by zoning, local ordinances, restrictions on what type of home you can build there, etc. You should always check with your city or town’s planning department before finalizing any plans for your property.
  • If you want a large lot that has plenty of room for parking and storage space (a garage), then expect these costs to increase significantly compared to smaller lots where there isn’t as much space available for vehicles or other items like patio furniture.*

Architect / Designer

If you’re looking for a licensed architect or designer to help with your project, be prepared to pay anywhere from $50-$200 per hour for their services. Most projects will require at least one meeting with the architect where you discuss the scope of work and how long it should take. You’ll also need to provide them with detailed plans before they can create one for you. This can cost anywhere from $1000 to over $10,000 depending on how complex your project is and how long it takes them to design it.

In addition, there are fees associated with obtaining an occupancy permit through the city or county government in which your house will be built (if applicable), as well as inspections required by code officials throughout construction (if applicable). When hiring an architect or designer, ask what fees they charge related to these processes so that they don’t surprise you later down the line.

Utilities & Permits

  • Utilities and Permits

Utility costs vary depending on where you live. The permit costs vary depending on the size of the project, as well as if it is a new construction or renovation project.

You can expect to pay between $300 and $400 for a residential permit. The cost will depend on the size of your project, as well as any changes that need to be made to city codes.


Labor costs are the biggest factor in determining how much it will cost to build your house. The size and type of house, as well as the quality of materials used, can affect labor costs.

Labor costs can also be reduced if you do some of the work yourself.

Labor costs can vary depending on the region and the labor market. An experienced builder may charge more than a novice, but they also tend to work faster and have better results.


Excavation is the process of digging a hole. In construction, excavation is used to remove dirt and rock from an area so that you can see what’s underneath it. Excavation can also be used to create a foundation for your house or any other type of structure.

Excavation costs depend on several factors, including how much digging needs to be done, what kind of soil is being removed, and whether you need help with the project (such as hiring equipment). In some areas, such as downtown Columbus Ohio where there are lots of buildings already standing on top of one another, it may take longer than expected because there might not be enough room for heavy machineries like bulldozers or backhoes; this means that workers would need more time in order not to disturb anything else nearby while working on your own property


Foundations are an important part of the house. The foundation is what supports your home and makes it sturdy. It can be poured concrete or slab on grade (no basement).

In Columbus Ohio there are many different types of foundations available to choose from:

Pile Piers: These piers go in the ground and then you build a steel cage around them so they don’t move. They last longer than other types of foundations because they don’t get wet, but they cost more money to install than regular concrete slabs or footings would cost.


Framing is the process of building the internal structure of a building. This includes the roof and floor trusses, wall studs and headers, and joists for floors and ceilings, as well as beams to support walls. Framing needs to be completed before exterior walls are constructed because it provides stability for these structures. In addition, it can also help reduce air infiltration into your home by providing a barrier between exterior weather conditions and interior living spaces.

In general terms, framing is done by carpenters who use lumber or metal beams depending on what type of structure they’re building (wood versus steel).


Vinyl siding is the most commonly used type of exterior siding in the United States. It’s made from polyvinyl chloride (PVC), which is a relatively inexpensive material to produce and install that can be designed to look like wood, stone, or brick.

Wood: Timber is still popular with many builders because it’s aesthetically pleasing and requires little maintenance over time. It’s also one of the most durable materials out there, but it costs more than vinyl or aluminum siding, so if you have your heart set on wood, you should expect to pay more for your house in Columbus Ohio than someone who picked another option.

Metal: Aluminum and steel are both popular choices for exterior walls because they’re lightweight and offer excellent insulation properties along with longevity that rival those of stucco products like fiber cement board (commonly called “hardboard”). Metal siding has become increasingly popular recently due to its durability; however, this type does require regular cleaning (soap and water will do) as well as occasional washing with bleach solution if you live near salt-laden areas like oceanside cities where humidity levels tend  to rise year round due to proximity without much relief coming from sea breezes blowing inland across miles upon miles of flat land surface area.”

Windows and Doors

Windows and doors are a big part of the cost of your house. They can be expensive, but there are ways to save some money. For example, you can buy windows that were previously used by someone else. These are called “re-purposed” windows. This is a good way to reduce costs significantly because they’ve already been installed in someone else’s house before and they’re just as good as new ones.

Similarly, doors are also an expensive part of building a house. However, there are ways to get them cheaper too: You can find them at salvage yards or other retail locations that sell used items at discounted prices (including Amazon). Also, note that if you’re buying new door hardware for your home addition project and have a tight budget for materials then we recommend looking into ordering from us here at Columbus Home Improvement because we provide reliable service along with products backed by lifetime warranties against defects or premature failure due to manufacturing errors.


Roofing is one of the most expensive parts of building a house. It is also a very important part of your home, so you want to make sure that it’s done properly. A good roof will not only keep you dry and comfortable, but also help keep your house in good shape for years to come.

Roofing projects can range anywhere from $20-$50 per square foot depending on how much material is used and what kind of materials are being used. The average cost for installing new asphalt shingles ranges between $2-$3 per square foot; however, if you have slate or another natural stone siding then expect that number to go up as well as specialty products like copper which costs an average of about $5-$6 per square foot installed

Exterior Trim

Exterior trim can be made of wood or vinyl, and the cost varies depending on the type of trim used. Crown molding is a popular choice because it adds depth to your home’s exterior and makes each room look more finished. You can paint or stain your exterior trim to give it your own unique style.

Exterior trim is available in a variety of styles, including:

  • casings that wrap around windows and doors
  • fascia boards, which are flat boards that run along the edge of roofs at right angles to rafters (or roof beams)

crown molding, a type of casing that wraps around the top of a window or door head jamb capstones, which are flat boards that run along the edge of roofs at right angles to rafters (or roof beams)

Interior Finish (drywall, paint, and trim)

Interior finish costs are the next items to get an estimate on. This will include drywall, paint, and trim. If you’re going to have woodwork done, take care of that early in the process so you can use any saved funds toward other projects or options in your home.

If you’re doing any remodeling or new construction, you need to know how much everything will cost. This includes materials, labor, and other expenses related to the project. If you’re building a new home, hiring a contractor will help with this process.


Before you know it, the floor is laid and your house will look like a brand new home. But what type of flooring should you choose? The options are endless, but here are some options that have stood the test of time:

  • Hardwood floors – These will last longer than any other type of flooring and they’re easy to install. They do cost more than carpeting though.
  • Vinyl or laminate wood floors – These are similar to hardwood floors in terms of durability, but they are much cheaper.

Bathroom Fixtures and Fittings (vanity, plumbing fixtures, ceramic tile, etc.)

The second biggest line item after the cost of land is usually bathroom fixtures. This includes sinks, toilets, and tubs. A simple toilet can run $300–$400, but if you want something fancier like a spa-like whirlpool tub that costs thousands more. Add to this the cost of ceramic tile flooring and other finishing touches (like vanity counters) for a fully functional bathroom that’s ready to go in your newly constructed Columbus Ohio home.


HVAC systems are typically included in the cost of your home. However, they can be expensive and should be installed by a professional. Homeowners should make sure their HVAC system is properly sized to handle the size of their house and maintain comfort levels throughout the year.

If you have an older home that was built before building codes were in place, it may not have adequate insulation or ventilation ducts to keep you comfortable during cold weather seasons. If this is the case for your Columbus Ohio house, consider adding additional insulation or upgrading your existing HVAC system before winter rolls around again.

Costs of building a house in Columbus, Ohio

If you want to know the costs of building a house, but do not want to spend a lot of time researching it, here are some answers:

  • The most expensive materials and labor costs when building in Columbus, OH include:
  • Roofing (shingles) – $2 per square foot
  • Windows – $1 per square foot
  • Concrete foundation – $4 per square foot

The least expensive materials and labor costs when building in Columbus, OH include:

  • Drywall installation – 75 cents per square foot for interior walls, $1.50 for exterior walls.

EIFS (Exterior Insulation and Finish Systems) – $1 per square foot.

Building a house in Columbus, Ohio is a big decision. You need to be prepared for all of the costs associated with it. The best way to know what you are getting into is by doing research and talking to people who have been through this process before.

Leave a Comment

error: Content is protected !!