If you’re looking for a way to tastefully incorporate a TV into your home decor, look no further than a built-in tv wall. It can be done with basic hand tools and woodworking skills, so even beginners can accomplish this build. Follow the steps below to create your own built-in tv wall.
For those of us that have to put a TV in a family room or great room, here is how to hide it in a wall.
For those of us that have to put a TV in a family room or great room, here is how to hide it in a wall.
This article will show you how to build your own built in TV wall. There are many different ways you can do this project, but I will go over the method I use and why I like it.
Here are some general tips before starting:
- Measure twice cut once – get it right the first time so you don’t waste materials or cause damage later on in the project
- Plan ahead – if you want to add lighting or speakers make sure they are included during construction so nothing has to be done after installation is complete
Prepare and trim the wall.
- The first step is to remove the baseboard and any other trim that is attached to the wall.
- Next, you will want to remove the drywall from your wall. You may need to cut a few more pieces out, but you can do this with a drywall saw or utility knife and hammer if needed.
- Now that your walls are bare and ready for action, it’s time to remove all of those electrical outlets. This includes switches and wiring as well as plumbing fixtures (toilets, sinks) and ductwork (air conditioning). If possible, try not to damage any of these things in case they need further work later on down the road – but don’t worry too much about it because most likely what’s inside there now isn’t going anywhere anytime soon anyway
Attach wood studs for the cabinet.
First, you need to attach the wood studs for your cabinet. You can do this using a level and a stud finder. Make sure that you’re using nails that are long enough but not too long; otherwise, they might poke through the other side of your wall.
Add metal studs for additional support and paneling.
There are a few steps to this process. First, you will need to add metal studs for additional support and paneling support. The metal studs are stronger than wood studs, but they are also more expensive, harder to work with, and more difficult to paint or install.
Next, you can hang your TV on the wall. This is an important step in building your built-in TV wall because it will support the weight of all of your equipment behind it (which can get heavy). To do this safely, make sure that you have at least two people helping out! Also keep in mind that some TVs require their own special brackets; if yours does not come with one already attached then make sure that before buying anything else off Amazon.
Finally: Time To Watch Some Movies
Add paneling to cover metal studs.
If you want to add paneling or other trim to cover the metal studs, use a router to cut it to size. You can also use a jig or table saw; just remember that these tools will create a more precise fit than a circular saw, which tends to be less exact.
Add trim to cover paneling.
If you have paneling, you’ll need to cover it with molding. You can purchase ready-made trim pieces at the hardware store or online. Alternatively, you can make your own using wood from a home improvement store or lumber yard.
Miter one end of each piece at 45 degrees or less, depending on the design of your cabinets and how much space is between them. This will make it easier for you to fit the molding into tight spaces later on.
Use caulk to fill gaps between panels and trim pieces as well as any other areas where they might be uneven or unfinished-looking before painting them with primer/sealer so that they don’t show through once everything else has dried completely (at least 24 hours).
Paint.
If you are painting the wall, make sure you use a good quality paint and primer. To save time and money, opt for a latex-based paint that is labeled as “low-VOC.” This will not only help you achieve better results but also be more environmentally friendly.
You can use all types of rollers to apply your paint, including foam rollers (usually used on ceilings) and synthetic bristle rollers (which are usually used on walls). You’ll need at least two brushes: one small brush for trim work and another large brush for applying base coat in larger areas or flat surfaces like floors.
As far as sprayers go, there are many options available on the market today; each type has its pros and cons depending on how much detail control you want over your project’s finish job.
A built-in tv wall can be a stylish addition for any home
A built-in tv wall can be a stylish addition to any home. It can be built to fit any space and even the TV size, shape and style you have in mind. A custom built-in is a great way to add style while also creating extra storage space at the same time.
The decision of how much wall space you want your TV unit to take up can affect how far apart you place your shelves. If you’re planning on having tall bookshelves on either side of the unit, it might make sense for them not to overlap with each other or go behind the TV itself so that there isn’t too much clutter around it when people are watching it from different angles (like when they’re sitting down on their couch).
Conclusion
Overall, these steps will help you achieve a stylish built-in tv wall that is both functional and aesthetically pleasing. This method can be used on any wall and will make your TV look like it’s floating in mid-air instead of being mounted to the wall. By following these simple steps, you’ll have yourself a stunning new feature to add value to any room.
