An easy way to build a back door step is to use a concrete foundation. Back porch stairs can be lightweight enough to move around the yard without destroying your back yard surface. A set of steps like this one is ideal for any family who enjoys spending time outdoors during the warm months of the year, whether they’re playing soccer, taking a dip in the pool or just relaxing in their outdoor chairs. There are many options when it comes to creating your very own backyard pool deck. When selecting materials you will have different uses in mind so will need to determine what you can offer with each piece based upon its size. Most people have seen products with an incline kit attached but never thought about incorporating them into their design or future plans. This arrangement creates an excellent contrast between glass tiles and natural wood and provides the opportunity to create light vs dark floors within your room.
If you’re building back door steps, make sure you follow these steps to make sure they last a long time.
STEP 1
- Measure the width of your back door.
- Measure the height of your back door.
- Measure the distance from your back door to the ground (also known as “drop”) You’ll need this for step 4, which is determining how much space you have to work with under your deck or porch area where you will build stairs and attach them to either side of the building frame that supports it—a concrete slab or platform is ideal but even a wooden deck will do if it’s level enough for stability purposes only.
STEP 2
Now that your boards are cut and ready, it’s time to assemble them. The first step is to use a level to make sure each step is straight. Once you’ve confirmed that the steps are straight, use a miter saw (or handsaw) to cut end-to-end joints at 45 degrees on each board so they fit together perfectly.
If you don’t have access to these tools in person, you can buy pre-cut pieces online from places like Home Depot or Lowe’s for about $4 per board foot (1 square foot = 144 inches).
Once the boards are all cut and assembled on site, use a nail gun with 1 1/2″ nails or screws every 6 inches along all edges of both sides of each board except at the top edge where it meets another piece—we’ll come back here later! Because we’re using pressure treated wood which has been treated with chemicals designed not only resist rot but also repel water—it will last much longer if left untreated rather than sealed up with stain or varnish that could attract moisture over time causing them rot faster later down road.
STEP 3
- Use a circular saw to make the cuts
- Use a jig saw to make the cuts
- Use a router to make the cuts
- Use a chisel and hammer to make the cuts
STEP 4
Now that you’ve determined the size of your steps and marked where to cut them, it’s time to start building.
Use a level to make sure that each step is level as you nail them into place. You want them to be straight, not leaning in any direction at all.
Use a tape measure to make sure each step is sized correctly. Each side of the step should be the same length as one side of the stairway opening (the distance from one wall post on either side). If either side is longer or shorter than this measurement, adjust by trimming with a utility knife until both sides match perfectly. This will help keep your doorway open clear so that you can pass through it easily without hitting your head or tripping over uneven steps every time you walk through it.
STEP 5
Once you have built the frame, it’s time to add your stairs. You can use wood or metal steps depending on what type of material you are using for the frame. The best type of wood is treated pine as it will last longer and not rot as easily.
You want to make sure that your steps are secure and safe so they won’t collapse under your weight or anyone else that uses them. If you use metal, make sure there aren’t any sharp edges where someone could get cut by accident while using them.
When building back door steps, it is important to make sure they are strong enough so they won’t break down over time from being used often throughout the year
This is the best way to make back steps.
- With a hammer, tap the nails into the wood.
- With a drill, make holes for the nails to go in.
- Use a screwdriver to screw the nails into their respective holes (which you made with your drill).
- Cut the wood with saws and chisels if you need it cut down to size or shape it into something different than what came out of the lumberyard.
- Final words
In this article, we went over the basics of building back steps. Now that you know what you need to get started and how to do it, you can easily build your own beautiful back steps for your home.
