Laying wall blocks is an easy process that can be done by anyone. Laying a wall of blocks is a great way to enhance your yard, add a new structure, or just make your home more secure.
Laying wall blocks is a straightforward, easy process. First, you’ll need to take the blocks out of their packaging, then lay them on top of each other. Make sure they’re all facing the same direction and that they’re in a straight line. Once you’ve laid out all your blocks, use a level to make sure they’re perfectly flat and even with each other. If you don’t have a level handy, try using some coins; if the coins sit flat on top of your block without any gaps or bumps between them, it’s good enough.
Now that your blocks are all lined up and level, it’s time to start stacking them up into something bigger. Start with one block on top of another and make sure it’s sitting flat and flush against the neighboring blocks. Then put another block on top of that one so that there is no gap between them—this will help keep everything from shifting as you go along with this step. Repeat this process until you have enough blocks stacked together for your project’s needs. OR
If you’re ready to lay some wall blocks in a different way, your first step is to check out the weather conditions. Wall block laying should only be done in dry weather. Once you have checked that the weather will cooperate, here’s what you need to know about laying wall blocks:
Use a spirit level and pack under the blocks to ensure they are level.
Use a spirit level to ensure the blocks are level with each other and the ground. If you’re building on a slope or uneven ground, you may need to pack under the blocks to level them out.
Check all blocks are level with each other as you go.
- Check all blocks are level with each other as you go.
- Use a spirit level to do this, or simply use your eyes.
- If any block is out of line, adjust it until it is level.
- Once you have finished laying one row of blocks, move onto the next row by placing the end of your trowel against a block in its first course and pushing down lightly until the trowel hits the ground about 1 inch away from where your wall meets the ground on both sides of your foundation.
If using a cement bonding agent, add it after the last block is laid.
After laying the first block, add bonding agent to it. Then apply bonding agent to the last block before setting it in place.
Use a trowel or brush to apply bonding agent to all of the blocks in between these two.
Block laying should be done in dry weather.
You may be wondering why wall block should be laid in dry weather. The short answer is that it’s better for the quality of your blocks and for the longevity of your project.
It is possible to lay them in wet weather, but they may be more likely to crack if it’s too humid or rainy outside.
You can also lay them in a warm environment, but not a hot one! If you’re working on an exterior wall in the summertime, make sure that you allow ample time for each layer of mortar to dry before adding another one (this will help prevent moisture from seeping into your walls).
Lay your blocks with care
- Make sure the blocks are level with each other.
- Make sure the blocks are level with the ground.
- Make sure the blocks are level with the rest of the wall.
- Make sure the mortar is level as well!
With these tips, you will be on your way to laying blocks like a pro. Do not be afraid to experiment with different patterns and custom designs, just remember that a spirit level is your friend.