If you’ve ever wondered how to put up a wall in your garage, this article is for you. We’ll go over different types of framing materials, including OSB and wood studs. You’ll learn what you need and how to use them effectively. We’ll also cover how to install drywall and insulation. You’ll be glad you read this article! And we’ll be back next week with more tips and tricks
Drywall
There are several different types of drywall to choose from for your garage walls. Fiberglass is a relatively inexpensive option, and vinyl is easy to install with pegs. Metal is sturdy and durable, but comes with a higher cost. The upside of using vinyl is that it can be customized to look the way you want. And if you have any semblance of artistic talent, consider using textured drywall instead of regular drywall.
Aside from its aesthetic value, drywall for garage walls is a great way to add protection, appeal, and longevity to your garage. It will hide any blemishes or problems that might be present in your garage. If you’re looking for a quality company to install drywall for your garage walls, contact a local contractor, like Danley’s Garages, in Chicago, IL. We’ve been providing detached garages for over 60 years.
Plywood is available in different thicknesses, and the optimum thickness is 3/8 inch. The international residential code specifies that a minimum of 3/8-inch plywood is used for sheathing walls. The thickness is important because it’s where siding will be attached, and will reduce the amount of seams. Using a horizontal hang method will minimize seams by 25%, which will reduce your work. And it won’t cost you a fortune.
Wood studs
Metal studs for garage walls are also popular. They are lighter and easier to work with. They are also fire-resistant and do not require nails or screws to hold them in place. Metal studs are available in various shapes and sizes. Some types are even alphabetical so you can easily identify them by name. Choosing the right type depends on the garage’s requirements and needs. Wood studs are typically more affordable than metal ones.
You need to measure the space between the studs before you install the sheathing. Be sure to check the lumber for warping, as this will make the frame less straight. Measure the distance between each board, and mark it with a plumb bob. Measure the distance between the studs and the base plate. Make sure to use a three-inch framing nail for each gap. Once you have your measurement, you can proceed to install the frame.
When mounting components on a garage wall, make sure to measure the space between the studs and the nearest light switch. If the distance between the studs is more than one inch, it is a stud. A center-sensing stud finder can detect the center of a stud and accurately measure the distance. A magnet can also be used to find studs in a garage wall. A magnet will attract nails in wood framing, so be sure to keep this in mind when searching for a stud.
Oriented strand board
Oriented strand board, or OSB, is a manufactured wood material similar to particle board. It’s typically made of two layers, the core and face panels. The core and face panels are separated by a forward slash, which makes them easy to remove if necessary. Oriented strand board is also easier to install than sheetrock. Drilling through OSB produces far less dust than sheetrock.
OSB is similar to plywood in appearance, although it is typically made of thinner strands. It’s also less expensive than plywood and has a smoother finish. Like plywood, OSB is produced from strands of wood that are compressed and oriented in specific directions. The strips are approximately 25mm wide and 150mm long, but they can vary in thickness depending on how much space you need to cover.
The advantages of using OSB over sheetrock include its affordability and ease of installation. For one, it’s more versatile and easier to obtain than sheetrock, and it doesn’t show dust like sheetrock does. But the downsides of using OSB for garage walls are many. Read on to learn more about this durable and versatile material. There’s more to it than meets the eye. You’ll be able to use your garage for more than just parking your car.
When choosing between OSB and drywall for your garage walls, you should consider its durability and resistance to rough use. While OSB is more durable, it also has higher nail/screw withdrawal ratings and is less expensive. Besides being a great choice for garage walls, it’s also easier to paint and requires less maintenance than drywall. It also helps keep the temperature in your garage comfortable all year round.
OSB
OSB is a common material for exterior wall sheathing. To start installing it, you should place spacers around the edges of the panel. Make sure the edges are at least 3/8″ apart and that there is no space between adjacent boards. To make the process easier, use nails to support the OSB panel. You can use an 8d nail for installation, and make sure to place them on the outside of the wall so they don’t dig into the wall.
OSB has many advantages. It is inexpensive and easy to paint. There is no need to worry about running wire, since it won’t be visible. Additionally, OSB is much easier to pound without breaking it. If you are planning to paint it, you should use bondo or joint compound to fill any voids. Just like drywall, OSB is not going to look as good as painted drywall.
If you are not familiar with OSB, you may wonder whether or not it is appropriate to use it for your garage walls. You should be aware that it is far more sturdy than plywood or drywall. It can also hold insulation. In addition, it has higher shear values than plywood. So, if you are unsure about the material, use a guide. However, make sure to wear safety boots when doing the job.
Plywood
If you have a garage that’s lacking in storage space, you might be wondering how to put up plywood walls in your garage. Plywood walls are inexpensive, easy to install, and can accommodate many different storage needs. You can choose to install the walls over bare studs or drywall. Once installed, you can use various hardware to customize your walls and create the ideal storage environment. Listed below are some tips to get you started.
First, make sure that the walls are fire-resistant. Because garages are typically connected to homes, fires can happen there. That’s why you’ll want to use fire-resistant X-Type drywal. This type of wood is lightweight, making it an ideal choice for garages. Remember to follow the building codes for your area to prevent any future problems. Also, it’s important to follow the building code when installing the walls, especially if the garage is located next to a living space.
Use plywood in your garage if you’re a beginner at DIY projects. While it’s cheaper than OSB, plywood has a tendency to have voids, which are undesirable in woodworking projects. Another advantage of plywood is that it has a flat appearance and a subtle grain pattern. If you’re using this material in a garage, you’ll need to make sure that you’re using a water-based block primer to prevent tannins from bleeding into your finished coat.
MDF
Before you start constructing your garage walls, you should consider the type of material you’ll be using. MDF is made from sawdust and glue and ranges in color from tan to chocolate brown. Its common thickness is 1/4 in. and its price is generally around $30 a sheet. Some home centers also carry various lengths and widths. You can use the same tools to work with MDF as you would with wood.
Slatwalls made from MDF are an affordable option for covering the walls of your garage. One piece of this material can cover the entire wall of your garage. However, since it is not moisture-proof, it will absorb moisture over time and develop mould. If this is an issue for you, consider a different material for your garage walls. MDF is an attractive and durable choice, but it won’t be water-proof.
If you’re not comfortable sanding the surface of your garage walls, you can try MDF. It has a smooth surface and lacks grain. It also takes paint well, but you’ll need to use an oil-based primer. In addition to paint, you can use stain to give it a woody appearance. The only disadvantage of MDF is that it weighs more than plywood, which makes it difficult to work with when your garage is accessed overhead.
