Internal Wall Construction Types

Internal wall construction types are the various ways in which internal walls are built. These include drywall, timber studs, and concrete blocks.

Internal wall construction types can be divided into two categories: load-bearing walls and non-load-bearing walls.

Load-bearing walls: These are used to support the weight of the building, including its roof, ceilings, and upper floors. They are constructed with a sturdy framework of steel beams and joists, with concrete infill.

Non-load-bearing walls: These are not designed to support any weight and are mainly used to divide up spaces within a building. They are often made from lightweight materials such as plasterboard or plywood.

There are three main types of internal walls: structural, non-structural, and composite.

Structural internal walls are the most common type of internal wall construction. They’re typically made of concrete, masonry, or a combination of both. These walls are built to support and distribute the weight of the structure to which they’re attached. They can be load-bearing or non-load bearing.

Non-structural internal walls are not intended to support the weight of the structure they’re attached to. They can be made from a variety of materials, including gypsum board, plasterboard, and drywall (also called DIB). These walls don’t carry any load but instead, provide a surface for finishing materials such as paint or wallpaper.

Composite internal walls are made up of two different materials that have been bonded together in some way like a brick veneer over block foundation walls.

The walls in your home are one of the most important aspects of its structure. Your walls help to keep your house standing, and they provide a barrier between the outside world and what’s inside. There are many different kinds of internal wall construction types from load-bearing masonry to modular timber framing and each one has its own unique properties and uses. Let’s take a look at each type in more detail:

What is Internal Wall?

Internal walls are used to separate rooms or areas within a house. They can be load-bearing or non-load-bearing, depending on what they are supporting. Commonly, internal walls are made of brick, block, or concrete.

Uses of Internal Wall

Internal walls are used to divide a room into smaller areas. For example, you could use an internal wall to separate the master bedroom from its bathroom and closet. Internal walls can also be used to separate rooms from the rest of the house. A common example of this is when you have a living room at one end of your house and in order to separate it from another room, an internal wall is built between them.

Reasons for Internal Wall Construction

There are many reasons for internal wall construction. The most common reason is to create a new room. It might be for the purpose of accommodating a growing family or adding an entrance to your house that wasn’t there before. You might also have an idea for something completely different, such as creating a new kitchen or increasing the value of your property by building on top of it.

Internal Wall Construction Types

The following internal wall construction types are commonly used for homes in the US:

  • Concrete block
  • Solid masonry (brick and stone)
  • Timber frame
  • Modular frame

Concrete Block

Concrete blocks are extremely popular due to their versatility and affordability. A concrete block wall is made of concrete and cement, which can be easily cut to fit any space. This makes it ideal for commercial buildings with irregularly shaped rooms or homes where the layout changes as you move through the house. Concrete block is also a good choice if you plan on painting your walls because it will be completely smooth once painted over, making it look like regular drywall with no visible seams.

Concrete blocks are often used as load-bearing walls, but they can also be used as internal partition walls (for example: between rooms). This type of wall is not designed to support large loads because each block is only about 8 inches wide but if properly spaced, they will help support some weight from above like furniture or boxes that may be stored against it.

Solid Masonry

Solid masonry is made of concrete, bricks, and mortar and is a strong material. It’s best used as partition walls and load-bearing walls. Solid masonry can also be used for exterior walls but it is not the best choice for interior ones because the material absorbs moisture from the air which makes it prone to decay over time in an enclosed space such as an indoor wall.

Timber Frame

Timber frame walls are made of solid timbers, which can be either fixed or floating. Timber frames are not load-bearing and are usually used for internal walls. They can be made from oak, pine, or mahogany and will give your room a warm and rustic look that is both practical and beautiful. If you want to add some character to your home without spending too much money then this may be the choice for you.

Modular Frame

A modular frame is a type of internal wall construction that consists of using lightweight metal frames to hold up drywall. The modular frame system was first developed in the 1960s as an alternative to stonework and masonry, which had previously been the only options available for building internal walls. Modular frames have since become one of the most popular ways to create interior partitions, as they allow you greater freedom when designing your space without requiring extensive renovations or large amounts of money.

The main advantage of the modular frame is its low cost compared with traditional methods like stonework or masonry. This makes it perfect for renters who want their homes to look nice but don’t want any major expenses associated with adding new rooms or renovating their current ones or even homeowners who simply want an inexpensive way of turning an empty attic into usable living space without hiring an architect or contractor. However, if you do decide on this option (or any other), keep in mind that while modular framing may be easy on your wallet now it could end up costing more later if repairs are needed down the road due to damage caused by poor installation quality workmanship so make sure whoever installs them uses high-quality materials such as steel screws versus wood screws because wood tends rot faster than steel does over time thus making repairs necessary sooner rather than later due oxidation caused by moisture exposure during rain storms etcetera.

Materials needed for Internal Wall Construction

You will need to have the following materials before you start your internal wall construction project:

  • Concrete blocks for solid masonry
  • Timber frame
  • Modular frame

Tools needed for Internal Wall Construction

  • Hammer
  • Tape measure
  • Chalk line
  • Trowel (hand or power)
  • Concrete mix (5 bags per 1 cubic yard of concrete, depending on the strength of your foundation soil and the type of rebar used)
  • Concrete mixer and mixing paddle (the best for small projects is an electric concrete mixer with a 6-inch drum)

Cost of Internal Wall Construction Types

The cost of internal wall construction depends on the type of material used and the area you are renovating.

You will need to factor in the following:

  • The cost of timber frame and the modular frame is more than concrete block, but less than solid masonry. These materials are more expensive because fewer materials are needed to build them, which means less labor and transport costs for your builder.
  • Concrete blocks can be cheaper than timber frames or modular frames because they require fewer skilled workers to assemble them, but they can also be more expensive if you need someone to lay brickwork inside the walls.

Maintenance tips for Internal Wall Construction Types

To maintain the wall, you will have to:

  • Clean the wall regularly. You should clean it with a damp cloth and water to remove dust. Do this at least once in two weeks.
  • Check the wall for cracks. Cracks indicate that there is a problem with the construction of your internal walls, and this may affect its durability. It is important that you check them frequently so that you can take measures to correct any issues before they get worse
  • Check if there are signs of water damage in your internal walls. This may be due to improper installation or poor maintenance by yourself or someone else who has previously lived in your house/flat/apartment etc., but regardless of how it happened, if there are signs of water damage then you need to act quickly before mold starts growing on these surfaces. As well as being unsightly (and sometimes even smelly), mold spores can be harmful if inhaled over an extended period which means it’s best not to leave things unchecked until later when hopefully no longer able – time now?

Before you knock down a wall, make sure it’s not load-bearing.

Before you knock down a wall, make sure it’s not load-bearing.

Load-bearing walls are those that are supporting the roof, floor, or foundation of your home. They can also support structural features such as staircases and exterior walls.

In Conclusion

When it comes to interior wall construction, the sky is the limit. A wall can be constructed out of any material you choose and can be designed to meet any particular need. It all comes down to what you want and how much money you want to spend on materials and labor. If your budget is tight, then consider using a modular system that requires less labor such as concrete blocks or timber frames. If you want something more durable such as solid masonry or modular frames with insulation between each layer of studs then those options are available too.

Leave a Comment